Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 8:27 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Tue Jun 05, 2018 8:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
Image

Segmented claro walnut in the center. I typically cut burl rosettes out of one solid piece, but thought I would give this a try. What do you think? The top is sinker redwood. There are no wrong answers. Lol.


Sent from my iPhone using Tapatalk Pro

_________________
Aaron Craig


Top
 Profile  
 
PostPosted: Tue Jun 05, 2018 8:35 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7219
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
TBH I dislike the asymmetry of the single shell line...


Top
 Profile  
 
PostPosted: Tue Jun 05, 2018 8:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
I like the wood ring and agree about the shell. Maybe just purf on both sides?


Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Tue Jun 05, 2018 8:54 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1954
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
While I agree with the concerns regarding the asymmetry as a stand-alone element, if you incorporate the look into the purfling, headstock, end graft, etc., it may well work perfectly fine, perhaps even wonderfully. In the end, it's totally up to you and that, for me, is the beauty of all this. [:Y:]

_________________
George :-)



These users thanked the author George L for the post (total 2): Michaeldc (Wed Jun 06, 2018 5:30 pm) • Bryan Bear (Tue Jun 05, 2018 10:06 pm)
Top
 Profile  
 
PostPosted: Tue Jun 05, 2018 10:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
How about this? Better? Worse? Still asymmetrical, but the single Osage Orange .055 radial purfling will be carried out around the perimeter of the top and headstock.

Image


Sent from my iPhone using Tapatalk Pro

_________________
Aaron Craig


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 7:24 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
No offense, in my opinion, just another AGF "modern" rosette.


Last edited by Haans on Wed Jun 06, 2018 9:32 am, edited 1 time in total.


These users thanked the author Haans for the post (total 2): jack (Tue Jun 19, 2018 11:57 am) • Clinchriver (Wed Jun 06, 2018 5:00 pm)
Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 7:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
I don't mind the asymmetry. It's dissonant for sure, but if that is what you are after then that's a good thing ;)

I'm not sure I know what Haans means by AGF modern but I think I can guess at it. I've done a few solid ring rosettes and never really liked any of them. They seem to have become 'a thing' 10 years ago or so. The radial ones at least look a bit more interesting and burls can be too. But for me personally I just like rings now unless it's a classical guitar then I go for traditional tiles.

But anyway like all things beauty, it really is in the eye of the beholder.


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 8:00 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
The ring seems like it would be a lovely back-drop for the shell, given the color and the uniformity of grain. Perhaps consider moving the shell to the center of the ring (see below...) and use a simpler black-white-black purfling at the periphery to set off the rosette.

Because our brains run poorly written, buggy, badly-documented software and a 300,000 year old, seldom-updated operating system, our eyes are easily fooled. Biasing the shell ring a few thousandths toward the soundhole may not be geometrically accurate, but will likely provide a little better visual balance. With the depth of color of the ring, a simple black-white purfling element of the same individual ply widths as the innermost element of the top edge purfling and the periphery of the ring might work well...the black ply might best be employed next to the shell.

Mr. James Olson uses a similar scheme on some instruments, and it always seems to me to be a nice mash-up of Mr. Brentrup's preferred traditional elements and the more modern approach exemplified by the flood of small jumbos seen on Acoustic Guitar Forum's builder's forum. While Mr. Olson's wooden ring is a radial element on the instruments I've seen in the shop, his website gallery shows other treatments as well.

There is also the issue of intent in design...as in, 'I think I like that treatment, but I'm not sure if he just ran out of shell or meant to do that.' If the viewer has to wonder whether the treatment is a consequence of supply chain issues versus the design process, some additional though might be in order. While I am not a great admirer of Mr. Somogyi's design language, he is a master at balancing the sort of variable symmetries your two designs seek to explore. There is never any question as to intent behind Mr. Somogyi's use of a design element, and that aids the viewer in 'getting' the larger picture.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)



These users thanked the author Woodie G for the post: Jonny (Sun Jun 10, 2018 9:40 pm)
Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 9:44 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
Haans wrote:
No offense, in my opinion, just another AGF "modern" rosette.


None taken. But I think you’re a bit behind the times. This is apparently the current state of AGF “modern.”

Image

FWIW, I like the classic look of a Martin-style three ring rosette, but I’m not interested in copying them.


Sent from my iPhone using Tapatalk Pro

_________________
Aaron Craig


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 10:14 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 30, 2009 3:20 pm
Posts: 456
Focus: Build
fwiw, believe it or not i had four years in fine art photography. good design has a "conclusion", it doesn't leave one guessing where it is. either someone "gets it" without explanation or they walk away.

as a stand-alone element that rosette leaves me asking where is the resolution? is this a mistake? what's going on here? perhaps you can offer closure with the rest of the design elements of the whole guitar so that it makes sense to the viewer and offers some level of completeness. something that ties everything together so that it makes sense.

(IMO)


Last edited by arie on Wed Jun 06, 2018 10:23 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 10:19 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2335
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
Sheesh, anything to be different, I guess (regarding the AGF example, not yours, Aaron).

I agree with what's been said about symmetry. IMHO, using OO in the rosette to provide continuity with he purfling doesn't help the asymmetry issue. Something about a symmetrical rosette flows better visually; a symmetrical rosette would seem more "at rest."

jac68984 wrote:
Haans wrote:
No offense, in my opinion, just another AGF "modern" rosette.


None taken. But I think you’re a bit behind the times. This is apparently the current state of AGF “modern.”

Image

FWIW, I like the classic look of a Martin-style three ring rosette, but I’m not interested in copying them.


Sent from my iPhone using Tapatalk Pro

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 11:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
jac68984 wrote:
Haans wrote:
No offense, in my opinion, just another AGF "modern" rosette.


None taken. But I think you’re a bit behind the times. This is apparently the current state of AGF “modern.”

Image

FWIW, I like the classic look of a Martin-style three ring rosette, but I’m not interested in copying them.


Sent from my iPhone using Tapatalk Pro



The customer is King.


You do not have the required permissions to view the files attached to this post.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 1:38 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
Rather than removing the abalone from the outer ring I would be inclined to add abalone to the inner ring (with the same BWB border as the outer ring). I think that would balance the design and provide a little bit of "bling" to an otherwise understated rosette. The "segments" in the upper part of the rosette seem to blend together, but that might just be the lighting and I don't think that's a big deal.
The original design would probably look O.K. to most people (doesn't look "bad" to me - I've done worse). What we are not seeing is the big black hole it goes around.


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 2:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
Clay, we are somewhat on the same wavelength. I switched it up once more. But the inner ring is OO. I think I like it.

Here’s a pic, though at the time I was more focused on documenting the damage done by the marginally sharp dental pick that impaled me (that wound goes through and through from the nail side out). I’ve had much worse, but still a nice reminder that even the simplest tools deserve respect. Lol.

Image




Sent from my iPhone using Tapatalk Pro

_________________
Aaron Craig


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 2:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
Ouch!
Been there, done that. I was once knocking loose 2X4's used to hold the spacing of some roof trusses and had one come back down and nail my finger through the finger nail to the truss with a 16 penny. Other than that just a few brad nailler strikes.

Rosette looks nice.

You Know.... If they put a nice looking pick guard on that AGF guitar it would cover up that blemish on the top........


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 2:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
My honest opinion: it doesn't matter. These sort of concentric ring rosettes have little artistic value. Just something to fill the space. As long as it's inoffensive, you're good :)


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 3:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
The client wanted more bling. So it’s:

Image

Symmetry problems solved. :)

Thanks all for your thoughts. Nice to bounce ideas around.


Sent from my iPhone using Tapatalk Pro

_________________
Aaron Craig


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 4:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2422
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
[:Y:] Making the overall design symmetrical with the two shell lines looks good to me and placing the radial purfling in the center backed by the darker wood makes it a focal point that I bet will look good in combination with that same purfling around the top.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 4:24 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Pretty busy, but I like it more than the others.
Seems to me that when "The customer is King", the builder is the peon. I've turned down quite a few orders in my lifetime as a builder because I didn't like where the "King" was going...
One in particular wanted a blond F5. I said no right away and then we talked for about an hour while he tried to convince me to build one to go along with 7 or 8 that other builders had built for him. I asked him what he was doing with all these blond mandolins. He said they were all in display cases. I asked him if he ever let anyone play them and he said no. I hung up...
So much for that King...


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 4:33 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I like that one. The symmetry is pleasing. Personally, I see no need to make Mavin and Gilson clones. I like some flair and creativity. Otherwise, just buy a factory guitar...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 5:46 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Feb 02, 2008 9:19 am
Posts: 184
Focus: Build
Status: Amateur
I like the clients choice the best also. Symmetry with the rings is pleasing to be, and the wood contrast is nice.


Top
 Profile  
 
PostPosted: Thu Jun 07, 2018 5:30 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
FWIW, I like the clients choice, looks fine.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Thu Jun 07, 2018 7:26 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 18, 2013 8:21 am
Posts: 149
Location: Wales U.K.
First name: Anthony
Last Name: Lee
Country: Wales U.K.
Focus: Build
Status: Amateur
Why can't I see the pictures?


Top
 Profile  
 
PostPosted: Thu Jun 07, 2018 7:30 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
whiskywill wrote:
Why can't I see the pictures?

Neither can I.

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
PostPosted: Thu Jun 07, 2018 7:45 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
I can't see the images either but if it's for a customer then yeah they get what they want.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: Gary Davis and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com