Official Luthiers Forum!
http://luthiersforum.com/forum/

Trevor's Weissenborn
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=51077
Page 2 of 2

Author:  mtracz [ Sun Apr 28, 2019 11:40 am ]
Post subject:  Re: Trevor's Weissenborn

Sand, raise the grain, sand, stain, sand, make some shellac, seal coat yeah!

https://youtu.be/37oacgvpHv4

Getting closer. Thanks for stopping by!

Author:  mtracz [ Sat May 04, 2019 1:38 pm ]
Post subject:  Re: Trevor's Weissenborn

Shaped the bridge. Getting close. Hit me up with any comments or questions.

https://youtu.be/sEzF8Qn_6Vw

Hope all is well!!!

Author:  mtracz [ Thu May 09, 2019 4:40 pm ]
Post subject:  Re: Trevor's Weissenborn

French polish complete. Letting it rest while I prep for the gluing the bridge and fingerboard.

https://youtu.be/TyrjXByNHW8

Hope all is well. Hit me up with any questions/comments. As always, thank you for stopping by!

Author:  mtracz [ Tue May 28, 2019 9:31 am ]
Post subject:  Re: Trevor's Weissenborn

Glued the fingerboard and bridge on. I use a vacuum clamp for the bridge and wish I made it years ago!!!

https://youtu.be/JVRg8auGS58

Hope all is well!!!

Author:  mtracz [ Tue Jun 04, 2019 1:18 pm ]
Post subject:  Re: Trevor's Weissenborn

And the guitar is finished and is in transit as I write this reply. Thank you all for following along on our journey. Your comments, kind works and encouragement has been a honor and pleasure. On to the next one!

https://youtu.be/LDEpPlm3h-s

All the best!

Author:  meddlingfool [ Tue Jun 04, 2019 1:41 pm ]
Post subject:  Re: Trevor's Weissenborn

The brass in the FB is a nice touch...

Author:  mtracz [ Tue Jun 04, 2019 2:30 pm ]
Post subject:  Re: Trevor's Weissenborn

Thank you!!! I like the way it turned out. Wasn’t sure during the process but very pleased. It really dances in the light.

Thanks for checking it out!!!


Sent from my iPhone using Tapatalk

Page 2 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/