| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Toothbrushes http://luthiersforum.com/forum/viewtopic.php?f=10101&t=51472 |
Page 1 of 1 |
| Author: | Terence Kennedy [ Wed Jan 16, 2019 5:09 pm ] |
| Post subject: | Toothbrushes |
After a post here many years ago (Hesh?) I started using a toothbrush and hot water from the glue pot for final cleanup after gluing braces with hot hide. Worked great. Recently I was doing a lot of fretwork and it dawned on me that it would work for final cleaning after gluing frets with hide glue. It works great and really gets that last bit of glue away from the edge of the fret. Save your toothbrushes! |
|
| Author: | Chris Pile [ Wed Jan 16, 2019 5:43 pm ] |
| Post subject: | Re: Toothbrushes |
I have several.... They are like zombies, they never die. When the bristles are used up, I use the handle to make other things (even tools). |
|
| Author: | Pmaj7 [ Wed Jan 16, 2019 11:18 pm ] |
| Post subject: | Re: Toothbrushes |
Thanks for the tip Terry! The GUM 471 is a nice brush. Sent from my SM-T350 using Tapatalk |
|
| Author: | Mark Mc [ Thu Jan 17, 2019 4:20 am ] |
| Post subject: | Re: Toothbrushes |
OK. Now I know what to do with the ones I have been keeping without knowing why I was keeping them. Chris, what other things do you do make with them? |
|
| Author: | Chris Pile [ Thu Jan 17, 2019 5:21 am ] |
| Post subject: | Re: Toothbrushes |
The ones with "rubber" inserts are good for hold-downs during tricky glue jobs with super glue. Nothing sticks to them. I've cut them up into pieces for spacers in tools, and under pickguards. They make good bumpers between tools or parts. Of course - they live again when cut down and modded into tool holders for Exacto saws and blades for jobs needing the right angle. I even saw a YouTube video where a guy made fishing lures from old toothbrush handles, and since I like to fish and have made my own flies since I was a kid.... You see where I'm going. The bass get bored easily, and respond to new colors and patterns. The ones with glitter hold a lot of promise. I have a jelly jar full of them standing by after their lives next to the sink are over. The whole world is raw material for our use, right? Like an old farmer - luthiers "use it up, wear it out". |
|
| Author: | Ernie Kleinman [ Thu Jan 17, 2019 7:49 am ] |
| Post subject: | Re: Toothbrushes |
Another useful item from luthier thames video is to use a plastic straw cut at the tip to a 45 deg angle . It is used with hot water to remove fish glue residue around bridges, and frets,which are seated with fish glue |
|
| Author: | Chris Pile [ Thu Jan 17, 2019 11:58 am ] |
| Post subject: | Re: Toothbrushes |
That's a great idea, Ernie. I'll bet a sharp guy like you knows some more clever stuff. |
|
| Author: | mountain whimsy [ Thu Jan 17, 2019 12:16 pm ] |
| Post subject: | Re: Toothbrushes |
I have an old electric toothbrush that I use on occasion for cleaning. |
|
| Author: | Chris Pile [ Thu Jan 17, 2019 2:10 pm ] |
| Post subject: | Re: Toothbrushes |
Speaking of cleaning, I have an old ultrasonic cleaner for Rapidograph pens... Works like a champ for really crusty electric guitar parts with serious crud and corruption on them. A little distilled water and a few drops of Dawn liquid soap, and the filth just erupts off the parts. |
|
| Author: | Ernie Kleinman [ Thu Jan 17, 2019 8:06 pm ] |
| Post subject: | Re: Toothbrushes |
Dear , Chris your right I am a very sharp guy, I keep all my tools extremely sharp.(except gillete razor blades) I gave away an extra set of aldi chisels that I had ground and honed to brightness to our local carpenter. He said the same thing , uber sharp guy ??? obviously another former SAT alumnus aka smartass school of technology |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|