| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Mando fretwire specs... http://luthiersforum.com/forum/viewtopic.php?f=10101&t=51902 |
Page 1 of 1 |
| Author: | meddlingfool [ Mon May 06, 2019 11:12 pm ] |
| Post subject: | Mando fretwire specs... |
Lots of info on crown height, width, and depth of tang but not width of tang. Can I use my .025 blade like normal or is the tang skinnier too? |
|
| Author: | SteveSmith [ Tue May 07, 2019 6:12 am ] |
| Post subject: | Re: Mando fretwire specs... |
The one Mando I built I used the standard blade. Just measure the wire. |
|
| Author: | Clay S. [ Tue May 07, 2019 6:37 am ] |
| Post subject: | Re: Mando fretwire specs... |
If it is Stew Mac wire it is the same dimension as their other wire (.023"). I've used it for mandolins, dulcimers, and ukuleles, and cut the kerf with the same blade as their medium guitar wire. |
|
| Author: | meddlingfool [ Tue May 07, 2019 8:27 am ] |
| Post subject: | Re: Mando fretwire specs... |
Thanks...wire not in hand yet to measure. Opted to wait before cutting. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|