Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:50 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Kerfing glue surface
PostPosted: Fri Jul 12, 2019 11:34 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1700
I’m working on a short scale small instrument and somewhere along the line I messed up my rim radius. This resulted in reapplying the radius and consequently sanding down some of the kerfing. It is in a wedge so sanding cut down on the glue area. What surface area do I need to maintain past the binding channel to maintain a strong bond and ensure things don’t fly off?


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Fri Jul 12, 2019 12:06 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
I'd say 1/8" lining surface would be fine. That plus the side thickness will give you around 0.200" total glue surface. Small instruments like ukuleles or violins get by with about 0.080" linings all the time.
Just be careful with your binding/purfling scheme. Your linings are shorter down the side....so don't to cut right through it when routing the binding channel.



These users thanked the author Quine for the post: SnowManSnow (Fri Jul 12, 2019 12:13 pm)
Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Fri Jul 12, 2019 12:48 pm 
Offline
Koa
Koa

Joined: Sat Mar 09, 2019 4:50 pm
Posts: 1092
Location: Goodrich, MI
First name: Ken
Last Name: Nagy
City: Goodrich
State: MI
Focus: Build
Status: Amateur
On the guitar I'm building the ribs are about 1.5 mm and the linings maybe 2.5 mm. That's .16" or so. I'm not worried. But then again I don't ever worry about anything.

I'm thinking of using black dyed wood veneer I have sitting around for the binding. I'll have to do it with several strips going around, but it is only .02" thick. I can scribe the depth, and file it about .02 deep. Glue them on, and scrape the sides. It won't harm the strength at all. I had to glue a few thin pieces on three small areas of the belly yesterday. I just decided to use the thin veneer, and the belly was in almost to the linings in those spots. Easy to add wood now than to fill a thin spot later.

I don't do things normally either, at least not very often.

_________________
Why be normal?


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Fri Jul 12, 2019 1:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
If you haven't closed the box you could redo those sections that have been sanded away. If the box is already closed and the plates are tight to the sides you could skip the binding and just smooth and finish the edges of the plates if it is a simpler instrument. The greatest risk is when you cut the binding rebate. Once the binding is installed most of the strength is regained if it is glued properly.



These users thanked the author Clay S. for the post: SnowManSnow (Fri Jul 12, 2019 1:43 pm)
Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Fri Jul 12, 2019 1:43 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1700
Clay S. wrote:
If you haven't closed the box you could redo those sections that have been sanded away. If the box is already closed and the plates are tight to the sides you could skip the binding and just smooth and finish the edges of the plates if it is a simpler instrument. The greatest risk is when you cut the binding rebate. Once the binding is installed most of the strength is regained if it is glued properly.

I think I’ll be ok as the binding won’t be anywhere close to the thickness of the available kerfing


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sat Jul 13, 2019 5:31 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4839
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I can tell you that you need about 1/4 in glue surface for long time
you get below 3/16 it will fail.
it is easy to fix now

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it



These users thanked the author bluescreek for the post: James Orr (Sat Jul 13, 2019 11:21 pm)
Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sat Jul 13, 2019 5:43 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1700
bluescreek wrote:
I can tell you that you need about 1/4 in glue surface for long time
you get below 3/16 it will fail.
it is easy to fix now

Are you saying 1/4 “ after the channel for the binding is cut???


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sat Jul 13, 2019 5:50 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1700
I’m going to rekerf the top. I’m not in a hurry and I need to get it right .
I’ll do a rekerf thread . Maybe it will help another noob one day


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sat Jul 13, 2019 6:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
SnowManSnow wrote:
bluescreek wrote:
I can tell you that you need about 1/4 in glue surface for long time
you get below 3/16 it will fail.
it is easy to fix now

Are you saying 1/4 “ after the channel for the binding is cut???


Sent from my iPhone using Tapatalk


A lot of kerfed linings are 7/32 wide which is close enough 1/4in to start with. When you rout out for binding typically that's only about as thick as your sides maybe a hair bit bigger if you go with thin sides. In the end though you should have the full, or very close to it, width of the original kerfed lining. If you add purfling on top of that then you should not rout down to the lining but rather have a bit of top wood stair stepped in.


Last edited by jfmckenna on Sun Jul 14, 2019 7:35 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sat Jul 13, 2019 8:11 pm 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 951
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
I don't know whether this idea will help OP out , but.... I use a full-height laminate I get from LMI instead of purfling on the soundboard. Lots easier to cut one channel a bit deeper and install the 'purfling' layer first, and in a second step, install the binding proper. For me, it's easier.

_________________
Peter Havriluk


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sun Jul 14, 2019 6:01 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4839
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
if you can end at 3/16 you should be fine if your under than you cutting it too close.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
 Post subject: Re: Kerfing glue surface
PostPosted: Sun Jul 14, 2019 10:07 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1700
bluescreek wrote:
if you can end at 3/16 you should be fine if your under than you cutting it too close.

Top kerf is gone. I’d rather make sure it’s ok and sleep at night:)


Sent from my iPhone using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker, Mike Thomas, Pat Foster, stumblin, Terence Kennedy and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com