Official Luthiers Forum!
http://luthiersforum.com/forum/

Ne Plus Ultra
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=52174
Page 1 of 1

Author:  Ruby50 [ Sat Jul 13, 2019 5:18 pm ]
Post subject:  Ne Plus Ultra

Pete Taran started Independence Saw in the late 90's, making the nicest little saws you ever saw. In the 00's he sold to Lie-Nielson, but he has decided to start making some again. For all of you that have to have the best but don't like those vintage thingies, try this:

http://www.vintagesaws.com/catalog/index.php?main_page=index&cPath=25&zenid=67qd0etf81dnjc4lsco1tbgel1

No affiliation yada yada yada, and more vintage saws for me

Ed

Author:  Woodie G [ Sun Jul 14, 2019 6:46 am ]
Post subject:  Re: Ne Plus Ultra

One of the build students was gifted with the shop's old Independence Tool dovetail saw, but prior to that, I did get to use it a bit. Other than the handle being less of a good fit than I might wish (smallish hands), it was a wonderful tool which seemed to effortlessly guide itself. I opted for the Lie-Neilsen tapered dovetail when it came time to upgrade from my re-toothed and tweaked hardware store dovetail saw, but there is something about a fully handmade tool that begs it be used. For a tool which might see decades of use by the original owner, the price seems outrageously reasonable.

Author:  Clay S. [ Sun Jul 14, 2019 8:33 am ]
Post subject:  Re: Ne Plus Ultra

"and more vintage saws for me"

+1

The old saws you can find at flea markets for $15 -$20 can often perform much better than the newer stuff found in the hardware store.
I'm sure the Ne Plus Ultra saw is an equally fine tool to the old Disston saws (maybe better) but my pocketbook likes the old stuff better.

Author:  Ruby50 [ Sun Jul 14, 2019 9:40 am ]
Post subject:  Re: Ne Plus Ultra

I have a matched set of pre 1920 Disston backsaws in rip and crosscut - some in 8", 10", 12" and 14" - and I can't imagine sawing getting much better. Handles fit my hand perfectly. I had them professionally sharpened and set one time to get them in shape, but I do the work now.

Ed

Author:  whiskywill [ Tue Jul 16, 2019 9:55 am ]
Post subject:  Re: Ne Plus Ultra

Have a drool over these. https://www.skeltonsaws.co.uk/mallard-saw

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/