| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Grizzly Straight edges http://luthiersforum.com/forum/viewtopic.php?f=10101&t=52246 |
Page 1 of 1 |
| Author: | nathanpeirson [ Mon Aug 05, 2019 12:24 pm ] |
| Post subject: | Grizzly Straight edges |
Hi folks, Anyone have experience with the Grizzly beveled edge straight edges? They are on sale right now and I may pick one up. Just wondered if anyone has used them. Seems a good price and according to their catalogue the accuracy is 0.001" and resolution (whatever that means) is 1/64. The 12", 24" and 36" are on sale. |
|
| Author: | Bri [ Mon Aug 05, 2019 12:53 pm ] |
| Post subject: | Re: Grizzly Straight edges |
That looks like the igaging product. It is graduated to 64ths of an inch. I have a few of these and they seem very good for the price. B |
|
| Author: | Clay S. [ Mon Aug 05, 2019 3:10 pm ] |
| Post subject: | Re: Grizzly Straight edges |
does anyone make a 30 inch straight edge? |
|
| Author: | nathanpeirson [ Mon Aug 05, 2019 4:14 pm ] |
| Post subject: | Re: Grizzly Straight edges |
I noticed LMI sells a 30" but it is polycarbonate and apparently they could possibly "cold flow" under certain conditions. That basically means warp as far as I can tell by the definitions. |
|
| Author: | DennisK [ Mon Aug 05, 2019 5:48 pm ] |
| Post subject: | Re: Grizzly Straight edges |
Yep, they're good, especially for beginners since you get 3 tools in one. A straightedge, a ruler with fine graduations, and the back edge makes a nice fence to run a knife along for slicing purflings and such. I think the tolerance on the 36" was listed as 1.5 thou when I bought mine for a different web site years ago, and that seems about right. It's possible that they've improved since then, but I suspect the .001" listed on Grizzly is lacking precision 
|
|
| Author: | Ruby50 [ Mon Aug 05, 2019 6:05 pm ] |
| Post subject: | Re: Grizzly Straight edges |
Here is a seller that deals in blems of reputable makers, including igauging. I bought a couple of small squares and they are perfect https://www.ebay.com/sch/taylortoolworksllc/m.html?item=151515185414&pwid=taylortoolworksllc&hash=item2347024106%3Ag%3Ag1kAAOSwAL9UjlaS&fol=343ceda6bc48a0180de8de5a7168828cead4c272c8166819578c76bf97606ae6&rt=nc&_trksid=p2047675.l2562 Clay - check your PM Ed |
|
| Author: | kjaffrey [ Sat Aug 10, 2019 8:46 am ] |
| Post subject: | Re: Grizzly Straight edges |
I have the 36” and really like it for trimming purling and other longer tasks. Definitely good bang for th buck |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|