Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
What's happening in your shop. http://luthiersforum.com/forum/viewtopic.php?f=10101&t=52257 |
Page 6 of 9 |
Author: | joshnothing [ Tue Oct 01, 2019 10:23 pm ] |
Post subject: | Re: What's happening in your shop. |
Starting on three spec builds, making an effort to use up some sets that have been sitting around and keep getting overlooked. They'll be 00-size guitars with the traditional scale length and geometry. |
Author: | Luthier1975 [ Thu Oct 03, 2019 7:05 am ] |
Post subject: | Re: What's happening in your shop. |
joshnothing wrote: Starting on three spec builds, making an effort to use up some sets that have been sitting around and keep getting overlooked. They'll be 00-size guitars with the traditional scale length and geometry. What are the woods? I love a OO. |
Author: | banjopicks [ Thu Oct 03, 2019 7:49 am ] |
Post subject: | Re: What's happening in your shop. |
joshnothing wrote: Starting on three spec builds, making an effort to use up some sets that have been sitting around and keep getting overlooked. They'll be 00-size guitars with the traditional scale length and geometry. Wowza! That's some nice wood, are they quarter sawn? |
Author: | joshnothing [ Thu Oct 03, 2019 8:00 am ] |
Post subject: | Re: What's happening in your shop. |
Luthier1975 wrote: joshnothing wrote: Starting on three spec builds, making an effort to use up some sets that have been sitting around and keep getting overlooked. They'll be 00-size guitars with the traditional scale length and geometry. What are the woods? I love a OO. Peruvian walnut, padauk and camphor. A few times through the drum sander today and the shop smells like Vick’s vaporub. |
Author: | banjopicks [ Thu Oct 03, 2019 8:04 am ] |
Post subject: | Re: What's happening in your shop. |
Refinishing a 70s Strat. My friend dyed the grain black and coated it with polyurethane, I'm not sure when. It was blonde when he bought it new and he decided he didn't like it so here we are. He still doesn't want it blonde so I'm going to burst it and finish with lacquer. Attachment: 20190925_180903.jpg Attachment: 20190925_181108.jpg Attachment: 20190925_185130.jpg Attachment: 20191003_080410.jpg I used some packing foam to make sanding blocks, they work really well. I've gone through 80 and 120 grit so far. Attachment: 20191003_080420.jpg
|
Author: | Brad Goodman [ Thu Oct 03, 2019 9:43 am ] |
Post subject: | Re: What's happening in your shop. |
Completed the body on a blistered maple and Sitka spruce J -200 This guitar is going to have a ton of abalone and mother of Pearl that’s my next step putting it all around the top,sides and the back... Sent from my iPhone using Tapatalk |
Author: | banjopicks [ Thu Oct 03, 2019 9:51 am ] |
Post subject: | Re: What's happening in your shop. |
Wow, that's gorgeous! |
Author: | Brad Goodman [ Thu Oct 03, 2019 11:44 am ] |
Post subject: | Re: What's happening in your shop. |
banjopicks wrote: Wow, that's gorgeous! Thanks! Sent from my iPhone using Tapatalk |
Author: | Luthier1975 [ Thu Oct 03, 2019 11:54 am ] |
Post subject: | Re: What's happening in your shop. |
Started buffing out this OM. Sent from my iPhone using Tapatalk |
Author: | Colin North [ Thu Oct 03, 2019 11:57 am ] |
Post subject: | Re: What's happening in your shop. |
Brad, and Blake, that's 2 stunning builds. |
Author: | Luthier1975 [ Thu Oct 03, 2019 12:04 pm ] |
Post subject: | Re: What's happening in your shop. |
Thanks Colin! Sent from my iPhone using Tapatalk |
Author: | meddlingfool [ Thu Oct 03, 2019 1:58 pm ] |
Post subject: | Re: What's happening in your shop. |
Nice treatment of the maple there Blake... |
Author: | jfmckenna [ Fri Oct 04, 2019 1:10 pm ] |
Post subject: | Re: What's happening in your shop. |
This just showed up on my doorstep. Bog oak and a hunk of walnut. Should be able to resaw 8 or 9 sets out of it. |
Author: | Michaeldc [ Fri Oct 04, 2019 8:17 pm ] |
Post subject: | Re: What's happening in your shop. |
Besides bracing up a top and a back I also did a couple center stripe inlays. I sure am looking forward to seeing that curly anigre under some gloss. M |
Author: | Ken Nagy [ Sat Oct 05, 2019 2:33 pm ] |
Post subject: | Re: What's happening in your shop. |
The inlay prompted me to put my project in. I replaced the back and belly on a 5 string viola I made. Wrecked them with purfling. My nemesis is purfling. So to conquer it, I did a crazy one. I managed to get all the way through it yesterday, and the light on my magnifier went out. Went to Menards today because I saw that they had the same one that I have, but with led light for $45. I bought one. Opening it up I saw that it has tow lenses, a 3 X like the other one, and a 5 X. I put the 5 X one in, and now I see that my work isn't just shabby; it really sucks. I have a LOT of filling to do. I saw on this forum that someone cut out an inlay on a fb using a Dremel and a small bit. I have one, and a bit that I was going to use the StewMac holder on. So I cut the pattern with a knife, veed out the top with a file, and then used that as a guide for the Dremel. I had to widen it some, but it wasn't TOO difficult. We'll see how the filling works out. I wanted to finish this, and then work on the crazy inlay I have dreamed up for the guitar. More stuff I've never done before. Attachment: 20191005_110153.jpeg
|
Author: | Michaeldc [ Sat Oct 05, 2019 3:14 pm ] |
Post subject: | Re: What's happening in your shop. |
Ken Nagy wrote: The inlay prompted me to put my project in. I replaced the back and belly on a 5 string viola I made. Wrecked them with purfling. My nemesis is purfling. So to conquer it, I did a crazy one. I managed to get all the way through it yesterday, and the light on my magnifier went out. Went to Menards today because I saw that they had the same one that I have, but with led light for $45. I bought one. Opening it up I saw that it has tow lenses, a 3 X like the other one, and a 5 X. I put the 5 X one in, and now I see that my work isn't just shabby; it really sucks. I have a LOT of filling to do. I saw on this forum that someone cut out an inlay on a fb using a Dremel and a small bit. I have one, and a bit that I was going to use the StewMac holder on. So I cut the pattern with a knife, veed out the top with a file, and then used that as a guide for the Dremel. I had to widen it some, but it wasn't TOO difficult. We'll see how the filling works out. I wanted to finish this, and then work on the crazy inlay I have dreamed up for the guitar. More stuff I've never done before. Attachment: 20191005_110153.jpeg Looks good to me!! Hand done, on a light colored wood...? Dang! My inlay pockets are cut on my CNC (Cheating). The purflings are done by hand... Be proud of what you did! M |
Author: | Ruby50 [ Sat Oct 05, 2019 7:51 pm ] |
Post subject: | Re: What's happening in your shop. |
Ken Nicely done Ee |
Author: | gregorio [ Sun Oct 06, 2019 2:33 pm ] |
Post subject: | Re: What's happening in your shop. |
i finally put up some wood racks to hold rough cut stuff that just lays around. Was a really great way to get it up and out of the way. Many of you likely use it, this is more a endorsement to those who are thinking about getting some; you will be happy you did. I have shelving in the basement for the smaller dimension pieces. Grand total of 80 bux. Recommended! Attachment: rack.jpg
|
Author: | Colin North [ Sun Oct 06, 2019 5:15 pm ] |
Post subject: | Re: What's happening in your shop. |
Well, strictly speaking it's not in my shop, but got this one finally fully finished, set up and playing like butter. |
Author: | gregorio [ Sun Oct 06, 2019 5:25 pm ] |
Post subject: | Re: What's happening in your shop. |
Really nice Colin. |
Author: | Colin North [ Sun Oct 06, 2019 5:34 pm ] |
Post subject: | Re: What's happening in your shop. |
Thank you. |
Author: | dzsmith [ Tue Oct 08, 2019 9:39 am ] |
Post subject: | Re: What's happening in your shop. |
It’s been too hot this year to work in the shop. I started a camphor burl non-cutaway electric that I plan to finish now that fall is here. I resawed the camphor four years ago and the pieces had severe bow. I clamped the pieces together for three years and it still had a bow. I spot glued the pieces together and flattened both outside surfaces. Resawed through the glue joint. Then I clamped and glued the pieces to the body. After drying, I surfaced the top. Despite the challenges, I’m determined to finish it. I plan to use purpleheart for the fretboard and head plate. Dan |
Author: | Ken Nagy [ Tue Oct 08, 2019 11:40 am ] |
Post subject: | Re: What's happening in your shop. |
Dan, A lot of effort and determination, but that is STUNNING. Having a vision is a powerful thing. Ken |
Author: | CarlD [ Thu Oct 10, 2019 9:37 pm ] |
Post subject: | Another Grandson's BD |
Acoustic Bass Guitar. Got shipped off yesterday to Fargo just in time. Cedar top, Bocote back & sides, bridge, fingerboard and peghed veneers, Curly Maple neck and bindings, Manzanita burl rosette, JJB bridge plate transducers. Attachment: PICT0277.JPG Attachment: PICT0278.JPG Attachment: P1012884.JPG Attachment: PICT0281.JPG Attachment: P1012883.JPG Attachment: P1012885.JPG
|
Author: | J De Rocher [ Thu Oct 10, 2019 9:49 pm ] |
Post subject: | Re: What's happening in your shop. |
Gluing the braces for an octave mandolin. Attachment: Gluing top braces.jpg
|
Page 6 of 9 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |