| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| ABS rosettes http://luthiersforum.com/forum/viewtopic.php?f=10101&t=52271 |
Page 1 of 1 |
| Author: | Brad Goodman [ Thu Aug 15, 2019 5:27 pm ] |
| Post subject: | ABS rosettes |
I am starting on a new batch of guitars and several of them will have plastic(ABS) rosettes. In the past on the few I have done I got a little end grain wicking especially when the black plastic was on the outside. I use weldon glue I get from LMI. I have never sealed the channel with shellac, but maybe it's time I start to....... using the shellac seems counterintuitive to me since I would think that glue wouldn't stick to it. Any advice would be appreciated. |
|
| Author: | Pat Foster [ Thu Aug 15, 2019 5:52 pm ] |
| Post subject: | Re: ABS rosettes |
I use a thin cut for this, 1 lb or less, with no wicking, no adhesion problems. You can test on scrap. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|