| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Best spray gun for EM6000 http://luthiersforum.com/forum/viewtopic.php?f=10101&t=52801 |
Page 1 of 1 |
| Author: | Phil J [ Tue Jan 07, 2020 6:49 pm ] |
| Post subject: | Best spray gun for EM6000 |
I've been researching new spray guns. I have been spraying EM6000 with a cheap hardware store gun and a 5 gallon compressor with mixed results. I want to upgrade my system with a new compressor and new gun. Just wondering if anyone has any suggestions for some mid priced guns to consider. I'm in Canada so I may have a difficult time finding certain models, but suggestions are welcome! Thanks everyone! |
|
| Author: | Glen H [ Tue Jan 07, 2020 7:32 pm ] |
| Post subject: | Re: Best spray gun for EM6000 |
I have Sharpe Finex guns both the jam gun and full sized. Bit around $125 and work fine for me. I don’t spray waterborne though. |
|
| Author: | johnparchem [ Tue Jan 07, 2020 7:35 pm ] |
| Post subject: | Re: Best spray gun for EM6000 |
I like the Qualspray qS125wB from from Jeff Jewitt's Homestead Finishing http://homesteadfinishingproducts.com/products-we-offer/hvlp-spray-equipment/qualspray-hvlp-guns/. It is a touch-up gun thus a perfect size for a guitar. needs 4 CFM of air at 40 psi, so within range for a lot of big box compressors. |
|
| Author: | dpetrzelka [ Tue Jan 07, 2020 8:07 pm ] |
| Post subject: | Re: Best spray gun for EM6000 |
I found a used Devilbiss SRI Pro that is an absolute pleasure to shoot. It's worked well to shoot EM6500 tinted water-borne lacquers this past week. It would likely work better with a larger tip for the tinted lacquer, currently running 1.2. I've only shot a very little EM6000, and will do more in the coming weeks, but I am very pleased with it. Much nicer atomization and control than the old suction feed DeVilbiss I had used before. That said, both Jay Lichty and Michael Colbert use much more modest air guns with stellar results. There is little need for a fancy gun when shooting EM6000. I believe both have used <$20 guns from HF or similar. https://lichtyguitars.com/2016/05/02/applying-water-based-finish-to-guitars-and-ukuleles/ |
|
| Author: | Bri [ Tue Jan 07, 2020 9:20 pm ] |
| Post subject: | Re: Best spray gun for EM6000 |
https://www.lemmer.com/contact.html Call these guys, they have been very helpful to me in the past B |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|