Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 4:18 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 86 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
PostPosted: Thu Sep 02, 2021 9:25 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1271
Location: Calgary, Canada
Status: Amateur
Hesh wrote:
Ken Nagy wrote:
Probably not much bat speed with that. Mickey Lolich hit one out in the World Series with the humongous pitchers bat. That was pretty cool.


I remember that!!! :). Let's see Bill Freehan, Denny McClaine, Micky Stanley, Norm Cash, Willie Horton, Dick McCalliff that's all I can remember from way back then and they say that pot smoking makes you lose your memory :)


Isn't my license on the bumper?



These users thanked the author Darrel Friesen for the post: Hesh (Fri Sep 03, 2021 4:23 am)
Top
 Profile  
 
PostPosted: Thu Sep 02, 2021 9:47 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2422
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Darrel Friesen wrote:
Hesh wrote:
Ken Nagy wrote:
Probably not much bat speed with that. Mickey Lolich hit one out in the World Series with the humongous pitchers bat. That was pretty cool.


I remember that!!! :). Let's see Bill Freehan, Denny McClaine, Micky Stanley, Norm Cash, Willie Horton, Dick McCalliff that's all I can remember from way back then and they say that pot smoking makes you lose your memory :)


Isn't my license on the bumper?


His name is Raaaalph, man.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter



These users thanked the author J De Rocher for the post: Hesh (Fri Sep 03, 2021 4:23 am)
Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 10:48 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Abuse versus ‘brusquely offered guidance’ – an example.

At about the three-year mark into a very intense repair apprenticeship, I was told to ‘handle’ a 1962 D-18 project so that Messrs. Morelli and Stock could get on with a couple of vintage restoration jobs.

The D-18 came down from a State College, PA original owner, and had been subject to one of the most ham-handed reset/refret/nut/saddle efforts I had seen up to that point in my time at Greenridge. The repair person who had botched the previous reset was apparently a brass and woodwind specialist, but did not feel constrained to ruin just trombones and flutes. The quote to the customer was just shy of $2K, with much of that involving the undoing the poor workmanship on the reset and the horrible fretwork. I was directed to come up with a work plan and brief it to both gentlemen based on my estimate.

All went well until I briefed the refret part of the work.

Me: This is the third refret per the owner on the original rosewood board, so I will pull the frets, repair the board as needed, then level, and final prep for refret. I plan on correcting the excessive relief of .016” with .0245 tang frets in 3, 5, 7, and 9, with .0225 in the rest of 1-14 and .0205 in the extension. I can add .0235, .0245, and crimpled .0245 frets as needed to get to my target of .004 under load. The owner runs EJ-16 strings and fingerpicks/light strummer for mostly folk accompaniment, so no heavier strings are likely to be used.

FM: What was the relief under tension and without?

Me: 0.016” and 0.011”

FM: On a T bar neck?

Me: Yes

FM: What is this… like the tenth reset you’ve done on a T-bar?

Me: (Thinking) yeah…

FM: How often have you seen that much relief on a board that got refretted less than a year ago?

Me: Well, that’s why I plan to get some compression in the 3, 5, 7, and 9, and stiffen things up.

FM: Customer said he thought relief was really high when he got it back from that <deleted>, right?

TS: Enough… way past babysitting you on this one. Get the neck pulled, body work done and prepped, neck trimmed and prepped to go back on, and then tell us why your plan for the refret is not going to work. If you want to bug people online about it, go ahead, but don’t expect us to cover your time when someone else is doing the hard part of the job.


The next weekend, I told the guys that I thought my plan was solid, and that I wanted to go ahead with the work. Surprisingly, I got a thumbs up to do the work after an ‘it’s your funeral’ look from Mr. Stock and the ‘I’d like to say something, but I raised three boys, so won’t’ grimace from Mr. Morelli.

FM: If you are absolutely confident, then have at it, but call the customer and tell him you’ll be slipping the delivery date a week.

Me: !@$%!!


No - I did not get paid for that four hours of pounding in increasing numbers of crimped 245 tang frets. Yes – I was close to tears after reaching a state of utter frustration as the relief refused to budge.

The guys suggested I pull all the frets clear of the body and weight the body for a relief measurement. That told me what I should have figured out from the initial numbers and close inspection of a slot or two.

Abuse? No…or at least not for those of us with parents not prone to offering participation trophies for just showing up. That gentlemen like Mr. Turner and others mentioned earlier in the thread are willing to offer their lessons learned absent the hard knocks taken should be cause for gratitude rather than irritation.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)



These users thanked the author Woodie G for the post (total 2): Durero (Fri Aug 12, 2022 9:43 am) • Hesh (Fri Sep 03, 2021 10:34 pm)
Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 12:32 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6977
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
I learned a lot from Fillipo and Todd. Yes, they could be brusque. But I learned a LOT. Still stay in touch with them on FB. I also learned a lot from Chris Pile. Now, my style has evolved. I'm not going to go to the brusque side anymore. If I can help it. Basically, if I cannot make my point in the open forum, I will take it to PM, if that fails, I will move on.

Hesh (we are being honest her, right?) probably still does not like me. And honestly, I could care less. I still believe essays are meant for books. Not forums. Nobody knows everything, not even Hesh. That said, I still learn from him and I long ago decided to bury the hatchet on that. Hesh knows what I mean. Peace...



These users thanked the author Mike OMelia for the post: Hesh (Fri Sep 03, 2021 10:26 pm)
Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 3:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7221
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Being a dick is optional.



These users thanked the author meddlingfool for the post (total 2): bcombs510 (Mon Sep 06, 2021 8:46 am) • James Orr (Mon Sep 06, 2021 1:27 am)
Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 5:21 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Rather a learned skill, Mr. Bond, as both gentlemen outside of the apprenticeship had nothing but time and interest to spare for my other projects, as they do for friends and neighbors. Reciprocity got hand-waved away on furniture, etc., including hours of instruction and stencil cutting/picking/prep for electro-etching and anodizing on what were euphemistically referred to as my metal shop projects. My two MSR builds are loaded with parts from both gentlemen, and not the MILSPEC, bargain-bin stuff.

Same for what seemed like infinite time granted me on the range and in the woods. I have a hard time faulting someone that spends a day with me working through single- and two-person clearing procedures, then another working through my stack of build issues on the flat range, to include gas block and can tuning...all the while ignoring his own recently completed projects. If memory serves, the last range excursion saw Mr. Stock spend most of his time spotting shots for the rest of us, or fixing our poorly setup stuff.

I did talk to a few of his military coworkers when we bumped onto one of his old crews during a fly-in brunch in Cambridge, MD. The upshot was that Mr. Stock was tireless in making sure the units he commanded were fully prepared to get the job done and ruthless in moving people out that could not meet standard. Apparently, check-rides from Mr. Stock were very, very, VERY thorough, but removed all doubt as to the examinee's level of competence or lack thereof. The term used was '...like a proctology exam, but six hours long.'

So perhaps a conditional dick, but of generous nature? :lol:

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)



These users thanked the author Woodie G for the post: Hesh (Fri Sep 03, 2021 10:32 pm)
Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 5:49 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7221
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
You assume I refer to Mr. Stock specifically, which I don’t. Never met the guy.


Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 9:03 pm 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 980
First name: Josh
Focus: Build
Status: Amateur
Am I the only one on tender hooks waiting to find out what exactly needed to be done to address the D-18s neck issues :D



These users thanked the author joshnothing for the post: Hesh (Fri Sep 03, 2021 10:29 pm)
Top
 Profile  
 
PostPosted: Fri Sep 03, 2021 10:29 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12973
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Mike OMelia wrote:
I learned a lot from Fillipo and Todd. Yes, they could be brusque. But I learned a LOT. Still stay in touch with them on FB. I also learned a lot from Chris Pile. Now, my style has evolved. I'm not going to go to the brusque side anymore. If I can help it. Basically, if I cannot make my point in the open forum, I will take it to PM, if that fails, I will move on.

Hesh (we are being honest her, right?) probably still does not like me. And honestly, I could care less. I still believe essays are meant for books. Not forums. Nobody knows everything, not even Hesh. That said, I still learn from him and I long ago decided to bury the hatchet on that. Hesh knows what I mean. Peace...


Hesh likes you just fine Mike and I admire your perseverance with Lutherie and your stuff looks great. You are also one of the few rocket scientists that I know and that's something to be respected in my book. I also agree with you there can be a lot to learn from people who we may not like how they deliver the message. Well said.

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: Mike OMelia (Fri Sep 03, 2021 11:47 pm)
Top
 Profile  
 
PostPosted: Sat Sep 04, 2021 8:15 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
joshnothing wrote:
Am I the only one on tender hooks waiting to find out what exactly needed to be done to address the D-18s neck issues :D


I really do not want to contribute to the body of knowledge that makes for 'if this, then that' problem solving, rather than the sort of open-minded detective work that is preferable and which builds a firm understanding of root cause(s) and effect(s). A few thoughts offered:

- Everything used eventually wears beyond acceptable tolerances
- Careful inspection of those worn-out things should be a part of the inspection process, and should help confirm or refute the accuracy of initial inspection
- It is worth taking a moment to look at things removed and where that thing was previously installed
- Owner recollection of prior work done is notoriously unreliable (witness effect writ large) and usually consists of only the most recent or most expensive work done. Law enforcement, military interrogators, medical professionals, and lawyers may further amplify...

More to the specific question?

Compression fretting for relief adjustment only works where there is something for the oversized tang to press against to create that wedging effect.

Understand that those here with decades of repair experience likely had several possible diagnoses and were formulating related courses of corrective action - pending more data - before getting much beyond the 'FM: blah, blah' stuff in my opening paragraphs. One more good reason to consider setting bruised egos aside when dealing with those providing 'brusquely offered guidance.'

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)


Top
 Profile  
 
PostPosted: Sat Sep 04, 2021 8:40 am 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 26, 2008 6:19 am
Posts: 1323
First name: Richard
Last Name: Hutchings
City: Warwick
State: RI
Zip/Postal Code: 02889
Country: United States
Focus: Build
Status: Amateur
Isn't this what double acting rods were designed for?

_________________
Hutch

Get the heck off the couch and go build a guitar!!!!


Top
 Profile  
 
PostPosted: Sat Sep 04, 2021 9:12 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Yes...and one of those possible courses of action I alluded to might be to remove the fretboard, install an adjustable truss rod, fabricate a new Brazilian rosewood fretboard, and to make the needed changes inside the body to allow post-fretwork relief adjustment.

I'll let the other repair and restoration specialists weigh in on whether they would consider that as the ultimate or even penultimate course of action in this sitution, but in the shop where I worked, other less intrusive, equally effective methods to address worn-out fret slots and excessive relief would be employed for the vast majority of vintage non-adjustable neck Martins in otherwise healthy condition.

Ah...my flight is called...finally! Have a lovely day and enjoy the holiday weekend!

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)


Top
 Profile  
 
PostPosted: Sat Sep 04, 2021 9:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I am amazed we made it this far in this conversation without any real escalating conflicts. I learned a lot from all of the above named individuals that at times were considered rude or even disrespectful. I think the hard conversations on the forum were not in posts where advise was given rather they were when threads devolved into personal back and forth attacks and insults. Sure there was the occasional rough reply when an inexperienced builder pushed back on freely given help with misunderstood second hand information. In those cases some may have felt dumped on, but generally they did not escalate. As of late the forum, while nearly unmoderated, has had very respectful, supportive and helpful participation.

_________________
http://www.Harvestmoonguitars.com



These users thanked the author johnparchem for the post: Hesh (Sun Sep 05, 2021 6:44 am)
Top
 Profile  
 
PostPosted: Mon Sep 06, 2021 1:24 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4777
Most of what people got fed up with had absolutely nothing to do with talking guitar, and I think that’s perfectly illustrated here, too.

FWIW, I have no idea why Rick gets brought up in these threads. I’d encourage everyone to go read his posts.


Sent from my iPhone using Tapatalk



These users thanked the author James Orr for the post: Hesh (Mon Sep 06, 2021 8:07 am)
Top
 Profile  
 
PostPosted: Mon Sep 06, 2021 7:52 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
James Orr wrote:
Most of what people got fed up with had absolutely nothing to do with talking guitar, and I think that’s perfectly illustrated here, too.

FWIW, I have no idea why Rick gets brought up in these threads. I’d encourage everyone to go read his posts.


Sent from my iPhone using Tapatalk


+1
Because he is not here..... gaah laughing6-hehe



These users thanked the author Clay S. for the post: Hesh (Mon Sep 06, 2021 8:07 am)
Top
 Profile  
 
PostPosted: Mon Sep 06, 2021 8:42 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3289
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
For anyone that doesn’t already know this - if using the web browser version of the site (I.e not Tapatalk) you can search for posts by author and get someone’s whole post history! I’ve read every post from a few folks, it’s like a crash course. :)

Unfortunately I believe you can’t search for removed user names, so searching for Todd Stock for example doesn’t work, although it’s been a while since I tried it. But… you can get a some of those nuggets even from deleted users if their comments were quoted by another user.

Hesh, you can tell Dave I’ve read everything he’s ever posted. I tried to read all your posts but I don’t have that much time. ;)

Unfortunately when you get back into the archives a lot of the photos are gone. They are either hosted on photobucket or similar and have disappeared or they were links to sites that are dead. I recently wanted to go back through the mandolin archive from Haans but all the photos are gone. :(

Go learn something!

Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post (total 2): Hesh (Tue Sep 07, 2021 3:05 am) • Pmaj7 (Mon Sep 06, 2021 12:32 pm)
Top
 Profile  
 
PostPosted: Sun Sep 19, 2021 7:45 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
I posted a picture of a fretboard here, and one of the members pointed out there was a wonky fret position in the upper register. I thanked him, and he said, "Thanks for taking that well". I responded that I was not stupid, and I know there are guys here that are good, and will catch stuff like that. It's why I'm here.
If you cannot take constructive criticism, you cannot grow. I for one am glad for all the curmudgeons and "pointer outers" around. Keep doing it!

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.



These users thanked the author Mike Baker for the post: Hesh (Sun Sep 19, 2021 10:32 am)
Top
 Profile  
 
PostPosted: Sun Sep 19, 2021 11:24 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12973
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Mike I appreciate your comments and I like you am OK with the idea that the learning process may not always be a coddling experience. When I arrived here in around 2006 we were smacked down often and what resulted is some of us are now professionals who own Lutherie businesses and make our living at it. For me it was not about the so-called romance of calling oneself a Luthier... I really wanted excel at Lutherie and perhaps be a Luthier as my retirement gig. That's exactly what I am now a professional Luthier who co-owns a busy, successful shop in Ann Arbor.

I pushed back and did not like the incivility at all back then. But in hindsight I was the stranger in this strange land called Loofierism (shout out to the Padma) and I should have shut up more and put my head down and learned more instead. The information was here but some including me may get sidetracked by the idea that none of us can possibly know it all all of the time. Sometimes everyone of us is completely new and that was the case with me. My ego got in my way and thankfully those helping me hung in with me anyway. I was wrong. My focus was on presentation and my feelers and not the information and the value that it represented.

You will do well Mike you have an understanding of not only why you are here but why I am here too. Thanks for your comments and thanks to everyone for their comments too.

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post (total 2): berberiv (Sun Sep 19, 2021 7:07 pm) • Mike Baker (Sun Sep 19, 2021 12:37 pm)
Top
 Profile  
 
PostPosted: Sun Sep 19, 2021 5:49 pm 
Offline
Koa
Koa

Joined: Sun Oct 28, 2018 3:40 pm
Posts: 500
First name: Ernest
Last Name: Kleinman
City: Guthrie
State: OK
Zip/Postal Code: 73044
Country: United States
Focus: Build
Status: Professional
Hesh, just saw your note from 1 month ago. Sounds like a cool band the funkadelics.. Never heard of them ?. What were they noted for ?? cheers ernie.



These users thanked the author Ernie Kleinman for the post: Hesh (Mon Sep 20, 2021 4:03 am)
Top
 Profile  
 
PostPosted: Sun Sep 19, 2021 9:29 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Quick search P-Funk for the story... more of a Catfish and Bootsy girl myself, but that entire back catalog deserves a spin. Yes...two separate bands for branding (Parliament more straight-up funk and Funkadelic more whatever works), but same members.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)



These users thanked the author Woodie G for the post (total 2): Ernie Kleinman (Mon Sep 20, 2021 11:54 am) • Hesh (Mon Sep 20, 2021 4:03 am)
Top
 Profile  
 
PostPosted: Sun Sep 19, 2021 11:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
Sounds like a cool band the funkadelics.. Never heard of them ?. What were they noted for ?? cheers ernie.


Ernie - you not hip to Parliament/Funkadelic? You've been missing out on some terrific grooves, my friend. They'll have you shaking your ass in no time. C'mon sing it with me - "WE WANT THE FUNK. GOTTA HAVE THAT FUNK".

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post (total 2): Ernie Kleinman (Mon Sep 20, 2021 11:54 am) • Hesh (Mon Sep 20, 2021 4:03 am)
Top
 Profile  
 
PostPosted: Mon Sep 20, 2021 4:05 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12973
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Chris Pile wrote:
Quote:
Sounds like a cool band the funkadelics.. Never heard of them ?. What were they noted for ?? cheers ernie.


Ernie - you not hip to Parliament/Funkadelic? You've been missing out on some terrific grooves, my friend. They'll have you shaking your ass in no time. C'mon sing it with me - "WE WANT THE FUNK. GOTTA HAVE THAT FUNK".


They also were known for "Free your mind and your arse will follow" :)

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: Ernie Kleinman (Mon Sep 20, 2021 11:54 am)
Top
 Profile  
 
PostPosted: Mon Sep 20, 2021 11:52 am 
Offline
Koa
Koa

Joined: Sun Oct 28, 2018 3:40 pm
Posts: 500
First name: Ernest
Last Name: Kleinman
City: Guthrie
State: OK
Zip/Postal Code: 73044
Country: United States
Focus: Build
Status: Professional
You folks are way ahead of me, lol.We are super square. I primarily listen to classical music. I spent 10 years learning to play the violin in high scrool and the symphony orchestra We toured upstate NY an VT,. Later on I learned to play the classical guitar. and I own a custom django reinhardt sty;le maccaferi jazz guitar. Thanks for the heads up I will check them out. !!



These users thanked the author Ernie Kleinman for the post: Hesh (Mon Sep 20, 2021 12:46 pm)
Top
 Profile  
 
PostPosted: Mon Sep 20, 2021 12:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7221
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Put yer dancing shoes on...


Top
 Profile  
 
PostPosted: Mon Sep 20, 2021 8:16 pm 
Offline
Koa
Koa

Joined: Sun Oct 28, 2018 3:40 pm
Posts: 500
First name: Ernest
Last Name: Kleinman
City: Guthrie
State: OK
Zip/Postal Code: 73044
Country: United States
Focus: Build
Status: Professional
Ed being from can couver ( my kids call it) I only own hiking boots . They are quite the band !!!,



These users thanked the author Ernie Kleinman for the post: meddlingfool (Mon Sep 20, 2021 8:36 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 86 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 60 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com