| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Needto identify source of .023" black wood veneer http://luthiersforum.com/forum/viewtopic.php?f=10101&t=56479 |
Page 1 of 1 |
| Author: | Bill Higgs [ Thu Mar 21, 2024 10:12 pm ] |
| Post subject: | Needto identify source of .023" black wood veneer |
Bought some .023" black wood veneer a few years back and I can't remember where. They are approximately 4" x 8" and .023" thick. The label on each piece says "Luthiers" (in cursive writing) Anybody know the company I bought these from? |
|
| Author: | Jim Watts [ Thu Mar 21, 2024 10:31 pm ] |
| Post subject: | Re: Needto identify source of .023" black wood veneer |
Perhaps b&b rare woods? |
|
| Author: | modkev [ Fri Mar 22, 2024 6:15 am ] |
| Post subject: | Re: Needto identify source of .023" black wood veneer |
Looks like it is probably Luthiers Merchantile International which is now closed. Their website is still up with a redirect to Stewmac, but you can see the Luthiers script to compare it to your piece. |
|
| Author: | bcombs510 [ Fri Mar 22, 2024 6:32 am ] |
| Post subject: | Re: Needto identify source of .023" black wood veneer |
Bill, is it fiber or wood veneer? If it’s fiber, LMI used to sell it. RC Tonewoods carries it as well and they are a forum sponsor- https://rctonewoods.com/RCT_Store/fiber ... -p-87.html Hope that helps. Brad Sent from my iPhone using Tapatalk Pro |
|
| Author: | bobgramann [ Fri Mar 22, 2024 8:31 am ] |
| Post subject: | Re: Needto identify source of .023" black wood veneer |
I have many things with that “Luthiers” label on it that I bought from LMI. I bought the veneer you describe from them frequently. Woodcraft sells packs of dyed wood veneer that ought to pretty much match what you describe other than the exact size. |
|
| Author: | Brad Goodman [ Fri Mar 22, 2024 10:24 pm ] |
| Post subject: | Re: Needto identify source of .023" black wood veneer |
Certainly Wood sells dyed black veneers in a couple of thicknesses. That's where I buy mine. |
|
| Author: | bluescreek [ Sat Mar 23, 2024 5:42 am ] |
| Post subject: | Re: Needto identify source of .023" black wood veneer |
I think RC Tonewoods is sell things like this |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|