| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| The freaking neck jig http://luthiersforum.com/forum/viewtopic.php?f=10101&t=57087 |
Page 1 of 1 |
| Author: | banjopicks [ Thu Jun 05, 2025 11:36 am ] |
| Post subject: | The freaking neck jig |
I can't find it to buy or plans to make one. I'm sure someone has one and I just need a few good photos and some dimensions. I hate to reinvent the dang thing. I have started drawing the SM one in Fusion 360. I suppose once I have that built, I can start making improvements from there. Seems a shame. I'll gladly buy the plans that no one seems to have or want to give up. |
|
| Author: | bcombs510 [ Thu Jun 05, 2025 11:55 am ] |
| Post subject: | Re: The freaking neck jig |
When I made one back in the day I just used this video and got it close - https://youtu.be/szTNSVtrGZc?si=emAOqIYnn0KhCcNB And this one: https://youtu.be/RBVFtVMP9r8?si=mpd_uY4kMgKoxnk9 You can buy an O’Brien inspired one commercially now from - https://skyscraperguitars.com/store/#!/ ... /643713254 Fusion 360 for this job feels like putting on a 200lb backpack to go walk the dog. Brad Sent from my iPhone using Tapatalk Pro |
|
| Author: | doncaparker [ Thu Jun 05, 2025 12:11 pm ] |
| Post subject: | Re: The freaking neck jig |
And you can buy plans from Robbie O’Brien here: https://obrienguitars.com/plans |
|
| Author: | CarlD [ Thu Jun 05, 2025 1:33 pm ] |
| Post subject: | Re: The freaking neck jig |
I've got one somewhere. I'll look for it this afternoon. I've got a Simpson jig so never built it. I'll see if I can take pictures of it and send it to you. Pm me your email. The files will be too big to send them here. Sent from my moto g stylus (2021) using Tapatalk |
|
| Author: | banjopicks [ Fri Jun 06, 2025 6:07 am ] |
| Post subject: | Re: The freaking neck jig |
Thank you all. I just ordered the plans. My intention is to re-draw it and cut the parts on my cnc. Im going to be making my own templates as well. |
|
| Author: | banjopicks [ Fri Jun 06, 2025 6:38 am ] |
| Post subject: | Re: The freaking neck jig |
bcombs510 wrote: When I made one back in the day I just used this video and got it close - https://youtu.be/szTNSVtrGZc?si=emAOqIYnn0KhCcNB And this one: https://youtu.be/RBVFtVMP9r8?si=mpd_uY4kMgKoxnk9 You can buy an O’Brien inspired one commercially now from - https://skyscraperguitars.com/store/#!/ ... /643713254 Fusion 360 for this job feels like putting on a 200lb backpack to go walk the dog. Brad Sent from my iPhone using Tapatalk Pro Not if you enjoy working in Fusion 360.plus, I like to use my cnc as much as possible. |
|
| Author: | banjopicks [ Fri Jun 06, 2025 9:44 am ] |
| Post subject: | Re: The freaking neck jig |
Right after I ordered the plans, I started looking at the eElevate jig. Looks a lot easier to make and stores easier. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|