| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Sourcing abrasive strips for Jet 16-32 sander http://luthiersforum.com/forum/viewtopic.php?f=10101&t=57743 |
Page 1 of 1 |
| Author: | pullshocks [ Wed Jul 08, 2026 8:12 am ] |
| Post subject: | Sourcing abrasive strips for Jet 16-32 sander |
I need to stock up on the abrasive strips. Any reccommendations as to brands and vendors? Thanks Pullshocks/Mark |
|
| Author: | dofthesea [ Wed Jul 08, 2026 8:14 am ] |
| Post subject: | Re: Sourcing abrasive strips for Jet 16-32 sander |
Might not be the cheapest but I just do Amazon |
|
| Author: | bobgramann [ Wed Jul 08, 2026 9:05 am ] |
| Post subject: | Re: Sourcing abrasive strips for Jet 16-32 sander |
I buy the precut from Klingspor. The precut cost more but I’m lazy. I just want to get back to work when I need to change a strip. |
|
| Author: | doncaparker [ Wed Jul 08, 2026 9:31 am ] |
| Post subject: | Re: Sourcing abrasive strips for Jet 16-32 sander |
I use the Klingspor cut-to-fit boxes. Here's a link to the page where you can pick out what you need: https://www.woodworkingshop.com/search/ ... 20to%20fit The ones I buy from Klingspor wind up being Jet branded boxes. There are colored stripes on the back of the abrasive to help you cut the strips the correct length for your sander. |
|
| Author: | meddlingfool [ Wed Jul 08, 2026 9:45 am ] |
| Post subject: | Re: Sourcing abrasive strips for Jet 16-32 sander |
I buy my sanding rolls from these guys… https://www.fintechabrasives.com/ |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|