Official Luthiers Forum!

Here are four different woods/colours. All are $4 per piece and these are all premium figure. They are over .25 high and over .105 thick but have not been thickness sanded on the faces. They are right off the saw. (EDIT: I just went and sanded them, there are a few saw marks but mostly clean at .105")



So from the left we have, red bubinga, white bubinga (the photo does not all show the quality of figure in the white stuff), curly acacia (Aussie Blackwood) and curly maple.

I have about 50 or so pieces of each of the bubinga and I have a few hundred pieces of maple and a couple of hundred pieces of acacia.

These will be the last items listed for the swap.

Thanks and I will start wrapping packages up!

Shane

Shane,
I'd like 15 of the red bubinga and 7 of the white bubinga strips.

Shane, I'll take 12 of the curly Acacia bindings.

Hi Shane,
I'd like 12 of the Curly Acacia.

Thanks,
Loren

Hey Shane,

I've pretty much blown my Swap-A-Palooza budget, so I'm gonna make a bundle offer, and if it doesn't fly with you, no problem.

What I'd like to offer is #13, #58 and 20 Red Bubinga bindings for a total of $250 shipping included...Let me know if it works for you , or if you'll save me (and my pocketbook) from myself

Aloha, Hen

Thanks for the offer Hen, but I couldn't go that low. The best I could do is give you free shipping but you would have to pay the listed prices as I have axed prices just for this little ditty.

Thanks though!

Shane

Got it Shane... So can we do #13 and only 7 Red Bubinga bindings for $148 (the listed prices) with free shipping?

Great Shane! PM me the info for payment and I'll get it out to you...Thanks, Hen

Hey Shane,

Can you also throw in two 8" double radius blocks.. one 20/16 and the other 14/12..with my other stuff? Thanks!

Hen

Shane: Can I have one (1) of the 12" double radius blocks with the following radius: 12" on one side and 16" on the other side. Thanks!