Official Luthiers Forum!
http://luthiersforum.com/forum/

OLF #2 Guitar Project On Track
http://luthiersforum.com/forum/viewtopic.php?f=10102&t=10802
Page 1 of 1

Author:  Bruce Dickey [ Wed Feb 07, 2007 9:17 am ]
Post subject: 

After receiving emails about this guitar, yes, it's on track for completion. Currently it is in Milwaukee Wisconsin at John Watkins for a neck. Next up Target Waterborne Finish done by Blake Dyson, then on to Hank Mauel for completion. Bruce

Author:  Bruce Dickey [ Tue Feb 13, 2007 2:21 am ]
Post subject: 

UPDATE on OLF #2, Remembering Donors

Posted: 16 January 2007 at 8:36pm      

OLF #2 Guitar Project

A Gift Guitar for an industry Guitar Guy,
known and revered by many. (Pssst! It's a secret)

Drew and donated the OLF SJ Plans to the OLF. His SJ plans are used for this project; Michael Payne

Donation of Back and Side set, bindings; Bob Cefalu

Bend Sides, attach to tail block; Lance Kragenbrink

Back construction and install neck block, furnish two part linings and install, radius sides and join back to sides; Paul Woolson

Donate SJ Mold, John Hall, Blues Creek

Purchase Mold and send needed Shipping Money, Todd Rose

Send Shipping Money, Mike Tobey

Furnish Abalone Rosette; Dave Rector

Furnish Sitka Top, join top and install rosette,
install Adirondack braces using hhg, radius sides for top and join top to body; Bruce Dickey

Bind and purfling; Brock Poling

Access Stage 5 Drednaught Case donated by George Armstrong for transport while under construction.

Gold Gotoh 510 Tuners donated by George Armstrong
Fretboard blank furnished by Dennis Leahy;

Compound Radius, Slot and Bind fretboard; John Mayes

Furnish a neck blank and shipping, John How

Shape and build Neck, furnish neck blank, join fretboard and fit neck to body: John Watkins

Target Waterborne Finish done by Blake Dyson

K and K Pickup System; Don Atwood

Furnish saddle and nut in bone or ivory; Michael McClain

Ameritage donated a custom case for final use: Ameritage Case Company

Furnish truss rod money and bridge blank money, SlackKeyMike, Mike O'Melia

Final setup, including making the ebony bridge and install, shape and install nut and saddle, fret the neck and fill fret ends, buff out, install clear pickguard, string up, install K and K pickup, break in and ship to Donee; Hank Maeul

Shipping money provided by anonymous OLF member.

Author:  Dave Rector [ Wed Feb 14, 2007 2:58 am ]
Post subject: 

Bruce, is this one still at Addam Stark's for finishing?

Author:  Dave Rector [ Wed Feb 14, 2007 2:59 am ]
Post subject: 

oops, just re-read your post. Looks like Blake is doing the finish.

Nevermind.

Author:  John Watkins [ Wed Feb 14, 2007 5:17 am ]
Post subject: 

I have it still.

Author:  Dave Rector [ Wed Feb 14, 2007 8:15 am ]
Post subject: 

John, how about posting a pic or two before it leaves your shop? I'd love to have a look at it with one of your necks on it!

Author:  Hank Mauel [ Wed Feb 14, 2007 11:23 am ]
Post subject: 

Got the K&K system from Don atwood and the bridge blank money donation from Mike O'Melia.
I asume the guitar will come in the Ameritage case along with all the remaining components for the final howdeedo.

Do duh donee know he/she is a donee yet?

Author:  Mark G [ Fri Feb 16, 2007 9:25 pm ]
Post subject: 

[QUOTE=Bruce Dickey]After receiving emails about this guitar, yes, it's on track for completion. Currently it is in Milwaukee Wisconsin at John Watkins for a neck. Next up Target Waterborne Finish done by Blake Dyson, then on to Hank Mauel for completion. Bruce [/QUOTE]


Hi Bruce - I am embarking on my own first solid guitar build, here in NZ just for the love of it, having played for the last 34 years. I am an ex-chippy by trade, after my Father but I am not a luthier and I respect the difference. I wanted your professional opinion on the likely sound of the finished instrument.


For the last 18 months I have been reading up on guitar building, I have a very clear vision of what I want and have prepared a design specification, which I am developing into a method statement and will progress these into a full scale drawing and prototype. Yes I am very meticulous!


Okay, so it will be a thru the body curly maple neck, 25 1/2" scale, 24 fret and 12" radius ebony fingureboard (1.73" Graph Tech wide nut and volute with Paua round inlays and jumbo frets), DiMarzio F-spaced Super Distortion and Super 2 pickups, 5-way switch and flat top body wings of, (pause for fanfare of trumpets): English Walnut (Juglens regia)!


My Father rescued a couple of display cabinet ends from an exclusive mens outfitters back in the 50s and its been around ever since! Their around 3/4" thick, so I'll laminate 3 together and only rout out enough to comfortably accomodate the screened wiring and hardware to maximise sustain - rather than the usual caverns which the mass producers create.  I like the clean REM sound as well the natural distortion of Led Zep, Bad Company, etc.


The finish must be clear nitrocellulose of course and the bridge will be Schaller's 3-way adjustable D6 in gold with matching Schaller M6 locking machine heads.


I want to do it all myself except cutting the fret slot which I have chickened out of - I know my limitations, so it will come from StuMac!


So what do you reckon?  Any view of the sound and advice on the building?  In particular, I haven't actually thought yet how to shape the neck, other than by the usual joinery techniques and alot of TLC, to be sure of getting it straight down to a slim C profile.


I am new to this forum lark and intended every member to see it and comment - hope I've allocated it correctly and apologies if I haven't.


Now I am posting this, I guess I am going to have to actually start it.


Please let me know what you think Bruce.  Many thanks indeed.


Mark G


Author:  Bruce Dickey [ Sat Feb 17, 2007 3:33 am ]
Post subject: 

Hi Mark, I'll have to re-read your post, but it sounds like you've put a lot of thought into it. It's amazing how well first guitars turn out for most folk who have previous wood-working skills. And it's even better if it runs in the family and folks have equipment you can use. I know you were wanting a big response and here I can help.

Consider copying this post and posting it over in the Main Forum. I'll be watching for it and respond over there. You might make it more open and direct it toward all the fine luthiers here. I know I hesitate to respond to threads where a specific person is named as requesting info from. This way, anyone can respond with years of experience to speak from, it's great.

Good luck in your efforts, Bruce

Author:  Bruce Dickey [ Sat Feb 17, 2007 4:29 am ]
Post subject: 

Mark I see you are building an electric and this forum while mainly acoustic building, there are some great builders here who do electrics too. I'm mainly acoustic even though I'm building my first electric too, a Wal type Bass with bolt on neck and dual stacked Alnico Humbuckers 18 Volt Active system. Again, try copying and posting your query over in the Main Forum and open it to experienced electric builders, you'll be amazed at the response. Bruce


Edited by Pepe Gonzales 17 February 2007 at 11:29am

Author:  LUTHIERfromRcanSaw [ Mon Jan 28, 2008 10:23 am ]
Post subject:  Re: OLF #2 Guitar Project On Track, 28JAN2008

Just heard back from John Watkins, and he says that the OLF #2 Guitar Project neck completion is moving toward the front burner. That's fantastic. Congratulations on your move and new shop John!

And mirroring a few comments above, how about some pics?

Thanks to all who donated time and talents to this Gift Guitar Project. The recipient (who encountered major life-threatening illness, but is mostly recovered) is an industry guitar guy and this guitar will go to him when it's done. We kind of want it to be a surprise, so he's unnamed other than the initial talk on the OLF which was removed, so even a search won't do you any good. PM me if you really want to know and I'll tell you. His initials are....

(oops, ran out of time, gotta run and catch the mailman)...

Author:  Dennis Leahy [ Thu May 15, 2008 9:03 pm ]
Post subject:  Re: OLF #2 Guitar Project On Track

Bumpity bump bump

Author:  LanceK [ Mon Jun 16, 2008 12:19 pm ]
Post subject:  Re: OLF #2 Guitar Project On Track

Anybody know where we are on this thing?

idunno

Author:  John Watkins [ Fri Jul 11, 2008 3:17 pm ]
Post subject:  Re: OLF #2 Guitar Project On Track

Almost done... should ship on Monday. Still going to Hank next?

Attachment:
olf_head.jpg

Author:  LanceK [ Fri Jul 11, 2008 6:41 pm ]
Post subject:  Re: OLF #2 Guitar Project On Track

SCHWEET!

Maybe Bruce Dickey will see this....

Author:  Bruce Dickey [ Sat Jul 12, 2008 8:20 am ]
Post subject:  Re: OLF #2 Guitar Project On Track

That looks great John.

I have an email in to Hank Mauel as we speak.

bliss

[:Y:]

Author:  John Watkins [ Mon Jul 21, 2008 10:35 am ]
Post subject:  Re: OLF #2 Guitar Project On Track

Someone sent me the tuners for this guitar some time back. Who should I send them to?

Author:  Hank Mauel [ Tue Jul 29, 2008 11:50 am ]
Post subject:  Re: OLF #2 Guitar Project On Track

John Watkins wrote:
Someone sent me the tuners for this guitar some time back. Who should I send them to?



Me!
PM sent to you with address info.

Hank

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/