Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
Mortise & Tenon vs. Dovetail http://luthiersforum.com/forum/viewtopic.php?f=10102&t=1132 |
Page 2 of 2 |
Author: | SonicAgamemnon [ Thu Feb 24, 2005 10:09 am ] |
Post subject: | |
. |
Author: | HankMauel [ Thu Feb 24, 2005 12:47 pm ] |
Post subject: | |
Try reducing the tenon to 3/4"...it works fine and reduces the thickness of the end block a bit. This is from experience on 50+ M&T (Cumpiano style) guitars. Remember, you are not torquing the neck into position with the bolts, merely holding it in a fine fitting joint. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |