Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:49 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject:
PostPosted: Wed Jan 09, 2008 12:12 am 
Offline
Koa
Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States
I was approached by ASIA to write another article. What would you people like to hear about. I have a case of writers block and am looking for inspiration .
   ASIA is in need of support and I hope we all can help
John Hall


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 12:17 am 
Offline
Koa
Koa

Joined: Sun Jan 02, 2005 1:38 pm
Posts: 1105
Location: Amherst, NH USA
Focus: Build
Status: Amateur
A tutorial on how you make your nice molds would be good. I don't think it would impact sales either.

What are the differences in making one mold verses going into production?

Someone told me that you were the source of many of the things the Martin's Luthier's connection sells. If that is true, an article on how that came about might be interesting.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 1:16 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8550
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
John, I think an article on side bending may be good.
From the thickness, profiling and bending, heat, duration etc, for various types of wood.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 1:31 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

A good hard look at side bending would be a good one John! Addressing issues like how to avoid cupping and breaking as well as wood preparation would be good issues to cover.


_________________
Reguards,

Ken H


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:02 am 
Offline
Koa
Koa

Joined: Tue Mar 14, 2006 11:42 pm
Posts: 565
Location: United States
I would like to see a fast foolproof way of fitting necks to the body.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:14 am 
Offline
Mahogany
Mahogany

Joined: Tue Jun 12, 2007 7:44 am
Posts: 64
Location: United States

John, I think there are some good suggestions with side bending. Although I haven't had issues (yet!) I do remember how nervous I was bending my first side. That was even magnified 10 fold when bending my first cut away. You might actually make it about bending in general? I see a lot of questions on bending bindings and purflings. Details that I've personally found found value in reading about here on OLF and around would be:


Side thickness, Temperatures, moisture, cut away considerations, figured woods, wrapping (kraft paper,foil, etc), bending form materials (spring steel, st. steel, etc), Super Soft (might need to not endorse a product and call it a "bending agent" typical to use in veneers?), spring back, cupping, double sides, side bracing. That certainly looks like a LOT to cover in an article?


I think that an article similar to Hesh's recent neck setting technique would also be good. I'm certainly refining my technique after seeing it.


Good Luck! If there's anything I can do personally to help just PM me. I could certainly proof read if you need someone to do that.


Joe



Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:21 am 
Offline
Koa
Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States
     I just sent in an instruction manual for ASIA to print but I do think a more detailed article will be a great idea and will do one.
     I will see that these ideas come together and will hopefully get them up in the next few issues. Rememeber that you can also send in articles.
    John


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:21 am 
Offline
Koa
Koa

Joined: Wed Jun 01, 2005 6:35 am
Posts: 1325
Location: Kings Mtn., NC, USA
First name: Bill
Last Name: Greene
City: Kings Mountain
State: North Carolina
Zip/Postal Code: 28086
Country: USA
Focus: Build
Status: Amateur
I'll second the neck fitting idea...but the side bending idea is also excellent, especially if you include the cutaway information. Other ideas might be:

Bridge Making
Neck Making (or some variation)
Installing amplification systems in acoustics
Neck resets
Installing rosettes
Builing a Vac Press jig (always a hot topic)


_________________
Eagles may soar, but weasels don't get sucked into jet engines.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:49 am 
Offline
Koa
Koa

Joined: Wed Aug 22, 2007 11:58 am
Posts: 1667
Write an article on why we need, or don't need, two luthier's associations.

Really.



Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 3:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
I think an article on bending would be good too.
Especially cutaways!

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 3:15 am 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
How about a guide to online luthier resources?


_________________
http://www.PeakeGuitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 3:48 am 
Offline
Koa
Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States
As for GAL and ASIA I like and belong to both. There are more than 1 ways to do things. Both organizations have merit and both provide a service.
   It is an interesting idea. You can write one Mario , I am sure they would be interested
john


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 4:44 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
I like the idea of an artical on not so much how to build fixtures but more on concept and design process of various fixture designers. That way you can incluid input from various fixture designers. This could be more of interspective into the thought processes that whent into the designs of the various fixture designers, rather than of a how to.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 9:58 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
[QUOTE=grumpy] Write an article on why we need, or don't need, two luthier's associations. Really.
[/QUOTE]

Double the annual conventions! And confusion, too!

If you write it, I'll buy the issue it's in. And the following one, for the letters section.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 11:21 am 
Offline
Koa
Koa
User avatar

Joined: Wed Mar 29, 2006 11:21 am
Posts: 805
Location: United States
First name: Jim Howell

John--


You are getting great suggestions!  I'd like to add one more, and that is a tutorial based around your inlaying prowess.  Something with your die grinder in action.


I belong to both ASIA and GAL and support both willingly.  If one organization is good, two have to be better!


 


_________________
Jim Howell
Charlotte, NC


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:29 pm 
Offline
Koa
Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States
   thanks again I have alot of ideas to work on . The Bending is a great article and I will do a detailed article on that.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 2:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2094
Location: Toronto, Ontario, Canada
Personally, I really like there being two organizations. GAL is much more west coast oriented and ASIA mid west to east coast. It is so much easier for me to get to ASIA symposium. I guess for a recluse like Grumpy, getting to either is a moot point

John a detailed article on bending would be great!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 3:42 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
The reason for two luthiers' organizations are steeped in a lot of turmoil, and I personally would love to see a reconciliation and merging of the GAL and ASIA.   Unfortunately it will probably take the death of a generation before that can happen.   Too much bad blood shed in that schism...


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 09, 2008 3:45 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
And John, I think you should take a good look at the Doolin-style side bender design.   There's a lot to be said for being able to very precisely profile sides and then register them at the butt before bending.   You just can't do that with the Fox style benders.   Also, working with lights on the inside and a heating blanket on the outside really works well.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com