Official Luthiers Forum!
http://luthiersforum.com/forum/

StewMac 14 fret CNC neck w/ neck block free s/h!
http://luthiersforum.com/forum/viewtopic.php?f=10102&t=17483
Page 1 of 1

Author:  AndrewGribble [ Thu Jun 05, 2008 8:46 am ]
Post subject:  StewMac 14 fret CNC neck w/ neck block free s/h!

StewMac neck/block still available. Reduced to $120.00; with free shipping (US only). This is over $40.00 off of StewMac's price.

Prices below include shipping/handling costs via USPS Priority Mail with Delivery Confirmation (within the 50 United States only please).

Brand New StewMac bolt-on 14 fret neck #1104 and bolt-on neck block #1134. StewMac sells these both for a combined total of $162.13 ($151.65 and $10.48 each). I am looking to get $130.00 for them.

Author:  AndrewGribble [ Thu Jun 05, 2008 8:48 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Stew Mac 14 fret neck still available...

Author:  matt jacobs [ Thu Jun 05, 2008 8:49 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Andy,
I'll take R1 and R4

Author:  Tim L [ Thu Jun 05, 2008 8:54 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Andrew,

I will take the R2, and the R4.

Tim

Author:  AndrewGribble [ Thu Jun 05, 2008 8:55 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Mattyeod wrote:
Andy,
I'll take R1 and R4



R1 and R4 SOLD to Mr. Jacobs. Thanks Matt! [:Y:]

Author:  AndrewGribble [ Thu Jun 05, 2008 8:57 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Tim L wrote:
Andrew,

I will take the R2, and the R4.

Tim


Thanks Tim, R2 is yours though mattyeod has already snagged R4; R6 is D size if you need a larger top.

Author:  SkyHigh [ Thu Jun 05, 2008 9:11 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

I'll take R9 and R10.

BUt I don't get what makes them "regular". It looks very clean from the pix. Is it not quartered???

Author:  AndrewGribble [ Thu Jun 05, 2008 9:26 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

SkyHigh wrote:
I'll take R9 and R10.

BUt I don't get what makes them "regular". It looks very clean from the pix. Is it not quartered???


Hello David, sets R9 and R10 are yours! These sets are just as high quality (stiff, QS, nice whisper) as the other sets yet have a slightly wider grain spacing. I think you'll enjoy building with these tops!

Author:  Tim L [ Thu Jun 05, 2008 10:15 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Andrew,

OK, I'll take the R6 instead. Thanks. I sent you a PM with my email address earlier.

Tim L

Author:  Bob Long [ Thu Jun 05, 2008 10:19 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Hey Andrew... I'll take R5 and R7 if there still available. Thanks!

long

Author:  AndrewGribble [ Thu Jun 05, 2008 10:22 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Bob Long wrote:
Hey Andrew... I'll take R5 if it's still available. Thanks!

long


Long, R5 and R7 are yours! Thank you very much!

Author:  Bob Long [ Thu Jun 05, 2008 10:23 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Andrew... Sorry Buddy, I edited my post to add another top.

long

Author:  AndrewGribble [ Thu Jun 05, 2008 10:30 am ]
Post subject:  Re: 10 Red Spruce tops and Stew Mac 14 fret neck w/ block

Bob Long wrote:
Andrew... Sorry Buddy, I edited my post to add another top.

long


Gotcha Bob. R5 and R7 are yours. Thanks again!

Author:  Tom Barton [ Thu Jun 05, 2008 8:09 pm ]
Post subject:  Re: 2 Red Spruce tops left reduced & StewMac 14 fret neck w/ blo

Andrew -

I'll take those last two tops, please!

Thanks!
Tom

Author:  AndrewGribble [ Thu Jun 05, 2008 8:25 pm ]
Post subject:  Re: 2 Red Spruce tops left reduced & StewMac 14 fret neck w/ blo

TomsOm28 wrote:
Andrew -

I'll take those last two tops, please!

Thanks!
Tom


Excellent Tom! They're yours!

The Stew Mac neck blank/heel block combo is still available for anyone looking for a nice 14 fret Martin-style neck. :mrgreen:

Author:  AndrewGribble [ Fri Jun 06, 2008 6:37 pm ]
Post subject:  Re: StewMac 14 fret CNC neck w/ neck block free s/h!

mattyeod, Tim L, Bob Long and TomOM28 I have shipped your sets via Priority Mail w/ delivery confirmation. If you'd like I can PM the #s to you. Thanks again guys!! [:Y:]

Author:  LaurieW [ Sat Jun 07, 2008 4:28 pm ]
Post subject:  Re: StewMac 14 fret CNC neck w/ neck block free s/h!

Andrew - I've never used a preshaped neck before - do they come for a specified scale length or is there enough room in the heel to tailor it? I normally build 25.5", but have recently started a couple of 25.34".....

Laurie

Author:  AndrewGribble [ Sun Jun 08, 2008 10:54 pm ]
Post subject:  Re: StewMac 14 fret CNC neck w/ neck block free s/h!

LaurieW wrote:
Andrew - I've never used a preshaped neck before - do they come for a specified scale length or is there enough room in the heel to tailor it? I normally build 25.5", but have recently started a couple of 25.34".....

Laurie


Laurie, yes either if the scale lengths you listed would be a perfect fit for this neck. If you are interested in it I would be happy to throw in a headplate of fiddleback Honduras mahogany, Honduras Rosewood, Cocobolo or African Blackwood if you'd like. Thanks!

Author:  AndrewGribble [ Mon Jun 09, 2008 5:01 pm ]
Post subject:  Re: StewMac 14 fret CNC neck w/ neck block free s/h!

End of Swap special...

Price reduced to $120.00. This is over $40.00 less than SM's price, and the shipping is on me!!! [uncle]

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/