| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Resonator Bass http://luthiersforum.com/forum/viewtopic.php?f=10102&t=3063 |
Page 1 of 1 |
| Author: | Ron Shriver [ Wed Aug 31, 2005 11:01 am ] |
| Post subject: | |
I am designing a spide bridge Resonator Bass with a 31" scale length and am trying to decide how much compensation should be used. Any ideas? It is to have not soundwell. It will be plywood with veneer. This is my first veneer and I would welcome suggestions. |
|
| Author: | Don Williams [ Wed Aug 31, 2005 12:03 pm ] |
| Post subject: | |
Hi Ron, According to everything I've heard, you would compensate similar to the acoustic version for roundnecks, but no compensation for squarenecks. You might want to pose this question to the normal Luthiers Forum section for opinions on Acoustic Bass saddle compensation. |
|
| Author: | LouisianaGrey [ Wed Aug 31, 2005 5:26 pm ] |
| Post subject: | |
Don's right. Mine is a 32" scale, and I didn't do anything different about compensation just because it's a resonator. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|