Unitarians are always changing...Wait, you meant...never mind.
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Am willing to convert http://luthiersforum.com/forum/viewtopic.php?f=10102&t=8261 |
Page 1 of 1 |
| Author: | SteveCourtright [ Sat Sep 02, 2006 3:40 am ] |
| Post subject: | |
Unitarians are always changing...Wait, you meant...never mind.
|
|
| Author: | Steve Kinnaird [ Sat Sep 02, 2006 4:12 am ] |
| Post subject: | |
Michael, I set the #1 and #6 tuners 7/16" in from the edge. #3 and #4 are 1/2" in. A line is drawn connecting those two points, and that puts #2 and #5 at, what...15/32" each? (Sorry, I know that's not in 1/16" increments. But you don't even have to measure those...just draw a line from 1 to 3, and from 6 to 4.) This is done to make a bit more room for the b and A string to miss those first tuner posts. And set at such a subtle difference, no one notices the difference in spacing. This all works out on my pehgead design, and YMMV. Sketch your design out first, for sure! Hope this helps, Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|