Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:08 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Sun Apr 06, 2008 3:35 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 18, 2007 6:46 am
Posts: 1012
Location: Issaquah, Washington USA
This concert ukulele is made of cocobolo with Englemann spruce top and figured maple binding. I've used faux turquoise for dots and bridge trim.
Attachment:
P1030869.jpg

Attachment:
P1030875.jpg

Attachment:
P1030874.jpg

Attachment:
P1030865.jpg


You do not have the required permissions to view the files attached to this post.

_________________
A higher purpose for wood.
Rich Smith
Issaquah, WA


Top
 Profile  
 
PostPosted: Sun Apr 06, 2008 4:48 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7195
Location: United States
Really nice! And great background too!

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."


Top
 Profile  
 
PostPosted: Sun Apr 06, 2008 6:02 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 18, 2007 6:46 am
Posts: 1012
Location: Issaquah, Washington USA
The background is from the days when I built furniture. Now I look at that table and see all kinds of instruments it should have been used in. [headinwall]

_________________
A higher purpose for wood.
Rich Smith
Issaquah, WA


Top
 Profile  
 
PostPosted: Sun Apr 06, 2008 7:15 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7195
Location: United States
Naaaahhh..... then you wouldn't have that gorgeous table.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."


Top
 Profile  
 
PostPosted: Mon Apr 07, 2008 9:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Beautiful Uke, Ricardo. Everything looks perfect, if you ask me. [clap] [clap] [clap] [clap] [clap]

How come this isn't in the Main Discussion Forum? It should be.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
PostPosted: Mon Apr 07, 2008 10:26 am 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 18, 2007 6:46 am
Posts: 1012
Location: Issaquah, Washington USA
Waddy I don't know. I think I'll have to steal your signature "I'm not quite sure how I got here from there!". Its almost perfect, the biggest problem I have is getting the binding a consistent thickness. I always have problems near the neck. On this one I sanded too thin. I use a laminate trimmer with following bearing on a jig. I think I'll have to use a Gramel to mark the binding channel first.

_________________
A higher purpose for wood.
Rich Smith
Issaquah, WA


Top
 Profile  
 
PostPosted: Mon Apr 07, 2008 3:27 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
I had that problem too. My binding is down to just over 1mm in some spots on my build - about 2mm in other places, but it all flows so it isn't too noticeable. I cut all my channels by hand with my homemade circle/purfling cutter and a chisel. I think my problem came from inconsistent purfling thickness and inconsistent gluing pressure, leaving gaps and stuff. Everywhere there was a little gap, the finding is thin.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com