Check it out! He's even got an arcade joystick and buttons in there. It's all tricked out!
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| WAY Cool CNC Electronics Rig.. http://luthiersforum.com/forum/viewtopic.php?f=10106&t=13388 |
Page 1 of 1 |
| Author: | Don Williams [ Sat Aug 25, 2007 12:40 pm ] |
| Post subject: | |
Check it out! He's even got an arcade joystick and buttons in there. It's all tricked out!
|
|
| Author: | Sprockett [ Sat Aug 25, 2007 1:38 pm ] |
| Post subject: | |
Dad... When can *I* play on the CNC machine!!!..... Hehehehehe... That's pretty cool, they don't stay that clean long :P... I have an flight sim joystick on mine, but I moved to a portable keyboard, I've been looking at this lately: Shuttle Pro I like the T tracks running length wise, mine run the other way, it works but can be a pain at times... Very nice machine he has there... -Paul- |
|
| Author: | Don Williams [ Sat Aug 25, 2007 9:43 pm ] |
| Post subject: | |
I'm going to do something similar with all the buttons and joystick, but it will mount underneath the unit and pull out on a set of drawer glides. ( yeah I know, I like using those  )
I will probably house the Gecko stuff seperately in a box with a fan or two, and some good filters to keep the dust out. I'm probably only going to have T-tracks on one half of my rig. It will have the gantry running the long direction, so it will be wide rather than deep. I plan to have a space in the front on one side where I can mount a body for doing end grafts, and also to mount a neck for cutting dovetails and tenons. Most of the jigs and such will be used on the other half of the unit. |
|
| Author: | Parser [ Mon Aug 27, 2007 4:03 am ] |
| Post subject: | |
That's a cool setup..! Can you play old school nintendo on that thing or what? The Z axis looks a little short to me though...no way I could fit a duck decoy under there! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|