| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Any CNC'ers in Socal http://luthiersforum.com/forum/viewtopic.php?f=10106&t=38392 |
Page 1 of 1 |
| Author: | peterm [ Fri Nov 30, 2012 1:42 am ] |
| Post subject: | Any CNC'ers in Socal |
I have a CNC in my garage....collecting dust. No time to get everything setup and done. If anyone close enough is willing to help I'll gladly pay for services. I gots wood and some cash! thanks! |
|
| Author: | arie [ Fri Nov 30, 2012 10:58 am ] |
| Post subject: | Re: Any CNC'ers in Socal |
what type of machine is it? |
|
| Author: | Steve Saville [ Fri Nov 30, 2012 7:17 pm ] |
| Post subject: | Re: Any CNC'ers in Socal |
I could help. Call me sometime. |
|
| Author: | peterm [ Sat Dec 01, 2012 12:22 pm ] |
| Post subject: | Re: Any CNC'ers in Socal |
Thanks! It's a home made CNC router. All aluminum 24x24 with a gecko 540 controller. |
|
| Author: | arie [ Sat Dec 01, 2012 8:15 pm ] |
| Post subject: | Re: Any CNC'ers in Socal |
i'll have to take a pass on this one Pete. All of my cnc experience is in the metal cutting/industrial sector. good luck! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|