| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Fusion 360 for $50 http://luthiersforum.com/forum/viewtopic.php?f=10106&t=49521 |
Page 1 of 1 |
| Author: | Andy Birko [ Thu Jun 29, 2017 3:53 pm ] |
| Post subject: | Fusion 360 for $50 |
If your business is strong enough to have to pay for fusion 360, there's a promo going on right now for $50. Use the code RENEW50 to get this deal. |
|
| Author: | MythicGuitars [ Mon Jan 07, 2019 10:12 pm ] |
| Post subject: | Re: Fusion 360 for $50 |
I thought fusion was free unless you make over 100,000$ per year using it or something? Unless something has changed recently, I have been able to re-up my membership 3 times for free. The first time I signed up it wanted me to pay, then I read the prompts more closely and accessed the free version legally and legitimately as a hobbiest. Did something change? |
|
| Author: | Andy Birko [ Mon Jan 07, 2019 10:33 pm ] |
| Post subject: | Re: Fusion 360 for $50 |
No, Nothing has changed except the pay price of F360 has gone up since I wrote that note. If you take a look in the original message I wrote: "If your business is strong enough to have to pay for fusion 360"... i.e. if you're grossing over $100k. |
|
| Author: | MythicGuitars [ Tue Jan 08, 2019 6:16 pm ] |
| Post subject: | Re: Fusion 360 for $50 |
Sorry, I just freaked out when I saw $$$$$ and skipped completely over the important part of that message. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|