Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Apr 18, 2024 3:42 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sat Oct 08, 2011 10:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I built this from a coffee can as you can see , I made it from stuff I had Lying around . The vibratory motor was out of a old sand blast cabinet . This particular motor is kinda expensive , however I think a cheaper unit could be had .

Anyway , I mount it in two holes I have drilled in a table and just set it in on the vibe pegs and let it sit , if its clamped it stops vibration and you dont want that . Put media in and some cleaner and turn it on .

In the bottom of the can you can see I forced a lid down in there . I put silicone in the bottom and forced lid down over it to help control leaks from cleaner . The media only needs to be wet , you dont want liquid standing .
Attachment:
100_1240.jpg
Attachment:
100_1242.jpg
Attachment:
100_1243.jpg
Attachment:
100_1244.jpg
Attachment:
100_1246.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Sat Oct 08, 2011 11:53 am 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 10, 2009 3:41 pm
Posts: 708
Location: Bothell, WA USA
First name: Jim
Last Name: Hansen
Country: USA
Focus: Build
Status: Amateur
Awesome!, Thanks Wud!

_________________
Jim Hansen


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com