| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Binding Jig For Rubberband Use http://luthiersforum.com/forum/viewtopic.php?f=10117&t=37440 |
Page 1 of 1 |
| Author: | WudWerkr [ Tue Aug 14, 2012 5:41 pm ] |
| Post subject: | Binding Jig For Rubberband Use |
I have tried a couple diffrent ways to do this and have decided that the ideas ive seen along this lines would be the easiest . I made the plywood jig the same "roughly" size as the guitar bodies I normaly build . I then made the plywood ring and glued and routered the relief. A wole lotta drywall screws , some poly tubing cut to size and I think we are ready to mount the Bindings . Attachment: 100_1577.jpg Attachment: 100_1578.jpg Attachment: 100_1580.jpg Attachment: 100_1581.jpg
|
|
| Author: | WudWerkr [ Wed Aug 15, 2012 1:52 pm ] |
| Post subject: | Re: Binding Jig For Rubberband Use |
And it works Great !! Attachment: 100_1583.jpg Attachment: 100_1582.jpg
|
|
| Author: | Chris Ensor [ Thu Aug 16, 2012 3:20 pm ] |
| Post subject: | Re: Binding Jig For Rubberband Use |
Looks great Wud! Building this sort of jig and switching to rubberbands made my stress level go way down on binding. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|