Official Luthiers Forum!
http://luthiersforum.com/forum/

Power planner to jointer
http://luthiersforum.com/forum/viewtopic.php?f=10117&t=42203
Page 1 of 1

Author:  pikolo [ Mon Dec 16, 2013 9:17 am ]
Post subject:  Power planner to jointer

Hello i have a power planner and flipped it upside down so as to use it as a jointer...the way to do this is from this sitehttp://sawdust.online.fr/Project/PowerPlaner/en_MiniPlanerJointer.php the question i want to ask is this safe? or it is possible that the blades fly to my head???

Author:  the Padma [ Mon Dec 16, 2013 11:37 am ]
Post subject:  Re: Power planner to jointer

As long as the blades have been installed properly there should be no problem. Me believe the angel that the blades are set in on most of these cutter heads are will be held in place by centrifugal force alone.

From years of experience these "convert this to that" ideas that show up in wood rags are IMHO not worth the effort or the time.

For the time its gonna takes to make this plus the $ for materials one could make a shooting board, score a few orphan tops and become a master at hand jointing.

Craigs list jointers are cheap...and lots of them around.

Author:  pikolo [ Mon Dec 16, 2013 12:45 pm ]
Post subject:  Re: Power planner to jointer

I live in Greece and here the planer jointers are expensive... i make instruments for a hobby so its to difficult to me to take everything...

Author:  the Padma [ Mon Dec 16, 2013 1:14 pm ]
Post subject:  Re: Power planner to jointer

pikolo wrote:
I live in Greece and here the planer jointers are expensive... i make instruments for a hobby so its to difficult to me to take everything...



Greece eh!...thats why this forum asks members to completely fill out their profile So the rest of us may advise them of their questioning in relationship to the country and environment of where they are working.

Greece...ok There are lots of bowl back instruments being built in Greece by loofers who use hand planes blocked up in a vise. Then holding the stave or plates, shoot the board over the plane. Some vice up the plates and others use a shooting board. All 3 methods are very fast, cheap and effective. Their skills are excellent. Why not talk to a bouzouki or Oud builder. Alls it take s is a bit of practice.

Me currently has a 6 inch jointer and a 4 inch hand held power planer...never use them for loofier work. Just not worth the hastle.

Jointers wood be ideal to have in a production line setting...but for a one man shop... pfft

But if you have the time to fiddle with something like that in the link you posted...by all means go for it.


blessings
duh ?adma

Author:  pikolo [ Wed Dec 18, 2013 2:02 pm ]
Post subject:  Re: Power planner to jointer

i have done it...the only concern i have is if the blades fly from the machine and land over to my head :P does the power planners have a safe lock or something similar? or the blades can come of the machine at anytime and it is just a matter of luck not be killed?

Author:  Alex Kleon [ Wed Dec 18, 2013 7:50 pm ]
Post subject:  Re: Power planner to jointer

pikolo wrote:
i have done it...the only concern i have is if the blades fly from the machine and land over to my head :P does the power planners have a safe lock or something similar? or the blades can come of the machine at anytime and it is just a matter of luck not be killed?


I would be more concerned with keeping my fingers away from the blades. Just make sure the blades are secured as per the tool instructions, wear eye and ear protection, and as applies to all tools, don't use it when your mind is not in the right place!

Alex

Author:  the Padma [ Wed Dec 18, 2013 10:18 pm ]
Post subject:  Re: Power planner to jointer

@ Alex and Pilolo

to me best understanding them blades are held in with a pile of screws, at least mine is and are fitted in such a way that centrifugal force will stop them from flying out of the machined head that they are bolted into.

But then me has been wrong before, once upon a time, long ago in our distant future.

Ya! right.


blessings

Author:  pikolo [ Wed Dec 25, 2013 9:40 am ]
Post subject:  Re: Power planner to jointer

thanks alot guys!!

Author:  Michiyuki Kubo [ Thu Apr 03, 2014 3:37 pm ]
Post subject:  Re: Power planner to jointer

Hey buddy, are you still alive after that? please let us know you are ok. idunno

Author:  pikolo [ Sat Apr 05, 2014 3:05 am ]
Post subject:  Re: Power planner to jointer

I am ok my friend I just dont use it in fact I gave away thw power planner I made myself a drum sander ;)

Author:  Michiyuki Kubo [ Mon May 05, 2014 5:53 pm ]
Post subject:  Re: Power planner to jointer

Glad to see you still have your head ! Haha

Author:  pikolo [ Tue May 06, 2014 11:57 pm ]
Post subject:  Re: Power planner to jointer

it was really dangerous and nor to mess with it...I need yhe jointwe though...making a fretboard side flat is very time consuming for me....

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/