This is probably the best and cheapest hold down clamp I have ever used!
4" PVC pipe cut on the bandsaw
3" hanger screw with 1/4" bolt
1/4"x 20 knob
May your sails be full & your glass never be empty!
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| PVC pipe hold down http://luthiersforum.com/forum/viewtopic.php?f=10117&t=42998 |
Page 1 of 1 |
| Author: | Dkeddy27 [ Tue Mar 18, 2014 1:47 pm ] |
| Post subject: | PVC pipe hold down |
This is probably the best and cheapest hold down clamp I have ever used! 4" PVC pipe cut on the bandsaw 3" hanger screw with 1/4" bolt 1/4"x 20 knob May your sails be full & your glass never be empty! |
|
| Author: | Chris Pile [ Tue Mar 18, 2014 3:15 pm ] |
| Post subject: | Re: PVC pipe hold down |
Two big thumbs up from me! |
|
| Author: | Pmaj7 [ Tue Mar 18, 2014 3:49 pm ] |
| Post subject: | Re: PVC pipe hold down |
That's what I'M talking about! |
|
| Author: | LarryH [ Tue Mar 18, 2014 4:19 pm ] |
| Post subject: | Re: PVC pipe hold down |
Nice David, I'll remember that one. |
|
| Author: | dzsmith [ Tue Mar 18, 2014 6:25 pm ] |
| Post subject: | Re: PVC pipe hold down |
Pure genius! |
|
| Author: | Colin North [ Wed Mar 19, 2014 4:30 am ] |
| Post subject: | Re: PVC pipe hold down |
Nice one! |
|
| Author: | John Steele [ Wed Mar 19, 2014 2:41 pm ] |
| Post subject: | Re: PVC pipe hold down |
Wow, thanks David; I have been needing some hold downs. These look great and I think I have a piece of 4" saved. Nice. |
|
| Author: | Hesh [ Wed Mar 19, 2014 3:59 pm ] |
| Post subject: | Re: PVC pipe hold down |
Great idea Skipper!!! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Joe Sallis [ Fri Mar 21, 2014 8:15 am ] |
| Post subject: | Re: PVC pipe hold down |
Encore, encore! |
|
| Author: | cphanna [ Fri Mar 21, 2014 9:50 am ] |
| Post subject: | Re: PVC pipe hold down |
Yes, I agree with everyone who has responded. I am continually amazed by solutions which seem so utterly OBVIOUS....but I don't think of them until someone like you shows them to me. Many thanks. Patrick |
|
| Author: | Dkeddy27 [ Sat Mar 22, 2014 7:38 pm ] |
| Post subject: | Re: PVC pipe hold down |
The idea came to me around 3am & a few brewskis! I have paid lots of money for hold downs, but this just makes more sense! I used a 6 inch piece of pipe and flattened it out a little bit with a heat gun and I have a long reach. It flexes just the right amount to push down and it feels very secure May your sails be full & your glass never be empty! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|