Official Luthiers Forum!
http://luthiersforum.com/forum/

Radial Rosettes
http://luthiersforum.com/forum/viewtopic.php?f=10117&t=46321
Page 1 of 1

Author:  ericschaeferguitars [ Tue Sep 08, 2015 3:17 pm ]
Post subject:  Radial Rosettes

Okay, some of you have asked about radial rosettes and the jig I use for designing and creating patterns, so I hope the 3 articles below help. Enjoy! Let me know what you think!
Radial Rosettes: Building the Radial Rosette Maker
http://www.ericschaeferguitars.com/radi ... es-buildin…/
Radial Rosettes: Making a Basic Pattern
http://www.ericschaeferguitars.com/radi ... es-making-…/
Installing the Rosette
http://www.ericschaeferguitars.com/inst ... e-rosette/

Author:  dzsmith [ Tue Sep 08, 2015 8:42 pm ]
Post subject:  Re: Radial Rosettes

Very clever, Eric!
Thanks very much for sharing!
Dan

Author:  MikeWaz [ Wed Sep 09, 2015 6:53 pm ]
Post subject:  Re: Radial Rosettes

This is great Eric. Looking forward to trying it on an upcoming project.

Mike

Author:  ericschaeferguitars [ Fri Sep 11, 2015 1:29 pm ]
Post subject:  Re: Radial Rosettes

Thanks Mike. Post a picture if you try it on your upcoming project. I'd love to see it.

Author:  Bryan Bear [ Tue Sep 15, 2015 3:25 pm ]
Post subject:  Re: Radial Rosettes

Thanks for posting these! Sadly I can't access the articles; it says they site is unavailable. I suppose it could be block here at work. I'll try again later from another network.

Author:  ericschaeferguitars [ Wed Sep 16, 2015 1:22 pm ]
Post subject:  Re: Radial Rosettes

The site was down for maintenance but its back up now, Brian. Check it out and let me know what you think!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/