Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Mar 18, 2024 10:00 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Nov 06, 2015 5:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5396
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
I have always found using sharpie ink (straight) when crowning frets that when I get to a thin line in top and stop, quite a wide top actually remains on the fret (I use 12x magnifying glasses)
This seems to be because the sharpie deposits quite a thick layer of ink.
Recently, when wiping off the ink with a paper towel, damp with meths, it left a noticeable "trace" of the ink all over the frets, much thinner.
So using this, I finished off the crowning with the 300 grit crowning file to a fine line of this thin layer of ink in the middle of the top of the fret.
Result was a much thinner line on the top of the fret, very quickly and easily polished up (I leveled the frets to 600 grit) with 3 finest sides of a 4-sided micro-mesh stick I use to polish up the sides of the frets shaped by the crowning fie.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: Hesh (Fri Nov 06, 2015 7:46 am)
Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 7:46 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12964
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
We don't use Sharpies and don't like them much either mostly because of the risk of getting some on somewhere that we don't want it AND the tenacious nature of Sharpie ink.

Marks-a-lot is our current fav and I just bought four of them for the kits that we are giving to our students at our fretting class later this month.

We also don't use ink for crowning or to work that line that we speak of. Instead simply adjusting the position of your work light and adjusting your perspective and you can see pretty easily the status and integrity of the fret crown top, the line if you will.

One of the reasons why we are no longer working with any ink for crowning is that we don't want the ink residue to gum up the crowning files and it tends to do exactly that.

With the Marks-a-lot ink the vast majority is removed in the leveling process and the little bit that may remain on the sides of the frets get's nixed with either the crowning files or the first sanding with 320.

Anyway try crowning without ink and by repositioning the work light and your perspective. It works like a charm!

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 8:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5396
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Is that permanent or dry wipe-off Marks-a-lot?
Yes, I find the Sharpie ink gums up the diamond fretfiles a bit, but a quick wipe with a brass wire brush and a meths wet cloth soon removes it and the cuttings both.
Meths seem to get it off pretty much anything, RW FBs, fingers, whiteboards etc.
Marks-a-lot not so widely available in UK, mostly Amazon at 24 for $24 so not so cheap even in bulk.
Try it with no marker ink - with my eyes! [uncle]

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 8:53 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1904
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
What exactly is "Meths"? Is it denatured alcohol?

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 10:58 am 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1161
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
sdsollod wrote:
What exactly is "Meths"? Is it denatured alcohol?

God, I hope so! Otherwise, it sounds like you've all "broken bad". [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 11:35 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12964
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
rlrhett wrote:
sdsollod wrote:
What exactly is "Meths"? Is it denatured alcohol?

God, I hope so! Otherwise, it sounds like you've all "broken bad". [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]


Sent from my iPhone using Tapatalk


LOL not to mention how to get the dead guy out of the basement....:)

Colin yes it's Marks-a-lot "permanent" and we use red for no other reason than that's what my local butcher carries in his store.

And yes again and I wish that you were here or I was there because I could show you hoe to manipulate the work light so that the untouched fret top really stands out. I don't have great eyes and I can see it pretty clearly so I am sure that you could too.

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 1:51 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5396
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
sdsollod wrote:
What exactly is "Meths"? Is it denatured alcohol?

Good guess!

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Fri Nov 06, 2015 3:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5396
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Hesh wrote:
....................
And yes again and I wish that you were here or I was there because I could show you hoe to manipulate the work light so that the untouched fret top really stands out. I don't have great eyes and I can see it pretty clearly so I am sure that you could too.


Who'yo callin' a hoe!! pfft

laughing6-hehe

Yes, I can use my work lights to see the untouched fret top, stands out fairly well, but just don't like to strain my tired eyes.
To each their own? [:Y:]

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Sat Nov 07, 2015 7:35 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12964
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Colin North wrote:
Hesh wrote:
....................
And yes again and I wish that you were here or I was there because I could show you hoe to manipulate the work light so that the untouched fret top really stands out. I don't have great eyes and I can see it pretty clearly so I am sure that you could too.


Who'yo callin' a hoe!! pfft

laughing6-hehe

Yes, I can use my work lights to see the untouched fret top, stands out fairly well, but just don't like to strain my tired eyes.
To each their own? [:Y:]


See how bad my eyes are...... :D Darn spell checkers substituted a word for me and I didn't catch it...... [headinwall] :D

_________________
Ann Arbor Guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com