Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:38 pm


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Apr 25, 2014 12:12 pm 
Offline
Walnut
Walnut

Joined: Mon Feb 10, 2014 8:11 pm
Posts: 2
First name: Mike
Last Name: Mattox
City: Wellington
State: Kentucky
Zip/Postal Code: 40387
Country: United States
Focus: Build
Status: Amateur
Hi everyone,
This is my first guitar build attempt. I jointed my top plates and glued them together with tite bond original about three weeks ago. Plates are thicknessed to 1/8". I've cut out the rough outline. I discovered today that the glue joint separated for about three inches on the face side but not quite as far up on what is to be the inside. How would I go about repairing this? Can it even be repaired? I don't know how I would even clamp it since the outlines already cut out. Could I just try to get as much glue down into it from both sides as I can then stretch tape across for a little clamping pressure? Should I just cut it in half and re-joint? Everything was going great up to this point!


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Fri Apr 25, 2014 2:37 pm 
Offline
Walnut
Walnut

Joined: Mon Feb 10, 2014 8:11 pm
Posts: 2
First name: Mike
Last Name: Mattox
City: Wellington
State: Kentucky
Zip/Postal Code: 40387
Country: United States
Focus: Build
Status: Amateur
I discovered the search bar and found an explanation of what to do :). Someone's already asked this question. Sites like this and nice folks that are willing to help are just awesome.


Top
 Profile  
 
PostPosted: Sat Apr 26, 2014 7:34 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Welcome to the forum and glad we could help.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com