Official Luthiers Forum!
http://luthiersforum.com/forum/

Progress on #2
http://luthiersforum.com/forum/viewtopic.php?f=10123&t=19912
Page 1 of 1

Author:  JRE Productions [ Fri Dec 05, 2008 12:03 pm ]
Post subject:  Progress on #2

Ok, I had posted some pics in the General Guitar building area...but I think many of you Electric guitar nuts would appreaciate this one too. So here is my second attempt at a build. I am in the process of setting the neck on this one. Its just sitting in the dovetail joint. I also need to binding the body before glueing the neck on.

Image

Author:  JRE Productions [ Fri Dec 05, 2008 12:04 pm ]
Post subject:  Re: Progress on #2

Image

Author:  SteveCourtright [ Fri Dec 05, 2008 12:11 pm ]
Post subject:  Re: Progress on #2

Looking good, Joe. Too much coffee before that second shot?

What are you using for Pick ups?

Author:  JRE Productions [ Fri Dec 05, 2008 2:15 pm ]
Post subject:  Re: Progress on #2

Actually...no caffene before I took the pic. Caffene usually steadys my hand. Sorry for the bad Cell phone pics. My teenage daughters have my good camera.

Pups? I don't really know. I was kind of waiting to see how this one turned out. If its a piece of crap when finished, it will get some matching pickups and be sold to cover the material. If it turns out halfway decent, I will probably load it with some PAF' type pups. Maybe SethLovers or Antiquities or simular. I actually have a set of 63/64 PAT number pups that are basically short magnet PAF's. But the covers are long gone. I suppose I could just by new chrome covers for them. It would sound very simular to the ES175. Still would like to try that 59/60 model.....

Thanks!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/