| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Smooth Edges? http://luthiersforum.com/forum/viewtopic.php?f=10123&t=24561 |
Page 1 of 1 |
| Author: | Jackson_McLellan [ Thu Nov 12, 2009 9:17 am ] |
| Post subject: | Smooth Edges? |
What is the best way to get those smooth curves in between the top and the sides of an electric guitar/bass? I was thinking of just sanding but i also have access to a CNC and similar equipment. |
|
| Author: | turmite [ Thu Nov 12, 2009 9:45 am ] |
| Post subject: | Re: Smooth Edges? |
Are you referring to the radiused edges? If so, the quickest way is to use a hand router but you must be careful of grain flow and the way you feed the router in the wood. Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|