Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:42 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sun Aug 16, 2015 5:38 am 
Offline
Walnut
Walnut

Joined: Thu Jan 29, 2015 5:23 am
Posts: 15
First name: TERRY
Last Name: CHAPMAN
City: stevenage
State: Hertfordshire
Zip/Postal Code: sg2 0np
Country: United Kingdom
Focus: Repair
Status: Professional
Hi,
Ive been given a kit built guitar to stain and finish in nitro.
Ive applied the stain after prepping etc and this is what I happened.
Its been put together with PVA because I can see it oozing out from under the purflings.
Is this the result of not cleaning up after and if so,how do I sort it?
Any suggestions would be helpful?
Thanks.

http://i227.photobucket.com/albums/dd31 ... 4%2020.jpg

http://i227.photobucket.com/albums/dd31 ... 2%2049.jpg

http://i227.photobucket.com/albums/dd31 ... 2029_1.jpg

http://i227.photobucket.com/albums/dd31 ... 2%2047.jpg


Top
 Profile  
 
PostPosted: Sun Aug 16, 2015 6:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
You have a lot of sanding to do. Sand and re-apply stain.


Top
 Profile  
 
PostPosted: Sun Aug 16, 2015 7:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
slash1953 wrote:
Ive applied the stain after prepping etc and this is what I happened.



Prepped? not really.....Yes the construction was sloppy but proper prep sanding would have taken care of it. Now you will need to deal with either sanding all the dye off to white wood or blending the dye after you sand out the glue in spots. In the future you can check for glue residue by wiping with spirits and looking at it under a strong light.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Sun Aug 16, 2015 2:41 pm 
Offline
Walnut
Walnut

Joined: Thu Jan 29, 2015 5:23 am
Posts: 15
First name: TERRY
Last Name: CHAPMAN
City: stevenage
State: Hertfordshire
Zip/Postal Code: sg2 0np
Country: United Kingdom
Focus: Repair
Status: Professional
B. Howard wrote:
slash1953 wrote:
Ive applied the stain after prepping etc and this is what I happened.



Prepped? not really.....Yes the construction was sloppy but proper prep sanding would have taken care of it. Now you will need to deal with either sanding all the dye off to white wood or blending the dye after you sand out the glue in spots. In the future you can check for glue residue by wiping with spirits and looking at it under a strong light.

Actually it was cleaned with white spirit and showed no traces of glue or anything.
Cant sand it too much as its not solid wood!


Top
 Profile  
 
PostPosted: Sun Aug 16, 2015 8:41 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Terry,
I can't account for it showing no traces of glue previously, but it's showing traces now. These guys are not kidding you. Every detail shot you've shown looks to me like glue residue holding out the stain--and all the instances are in the usual problem areas, too.

It's the first thing I suspected in your shot of the sides under the bindings. It's the first thing I suspected in the unstained streak on the back of the peg head. It's the first thing I suspected where the sides meet the neck.



These users thanked the author cphanna for the post: slash1953 (Mon Aug 17, 2015 2:00 am)
Top
 Profile  
 
PostPosted: Mon Aug 17, 2015 2:01 am 
Offline
Walnut
Walnut

Joined: Thu Jan 29, 2015 5:23 am
Posts: 15
First name: TERRY
Last Name: CHAPMAN
City: stevenage
State: Hertfordshire
Zip/Postal Code: sg2 0np
Country: United Kingdom
Focus: Repair
Status: Professional
Oh well,its out with the sandpaper again,Just have to be careful I done break through the veneer?
Thanks guys.


Top
 Profile  
 
PostPosted: Mon Aug 17, 2015 6:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
slash1953 wrote:
Actually it was cleaned with white spirit and showed no traces of glue or anything.
Cant sand it too much as its not solid wood!


Then you still need to learn what to look for and how to look for it. A good brite work light on a movable arm is a must for inspection during prep. You need to look at the wetted surface with a raking light across it. The glue will flash in the light. It is not always easy to see but it can be seen.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Tue Aug 18, 2015 1:54 am 
Offline
Walnut
Walnut

Joined: Thu Jan 29, 2015 5:23 am
Posts: 15
First name: TERRY
Last Name: CHAPMAN
City: stevenage
State: Hertfordshire
Zip/Postal Code: sg2 0np
Country: United Kingdom
Focus: Repair
Status: Professional
B. Howard wrote:
slash1953 wrote:
Actually it was cleaned with white spirit and showed no traces of glue or anything.
Cant sand it too much as its not solid wood!


Then you still need to learn what to look for and how to look for it. A good brite work light on a movable arm is a must for inspection during prep. You need to look at the wetted surface with a raking light across it. The glue will flash in the light. It is not always easy to see but it can be seen.


I wont be taking any more ready made guitars to spray again.
Its easier to just clean up as you work?
Ive never had this problem before.


Top
 Profile  
 
PostPosted: Tue Aug 18, 2015 6:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
After 12 guitars, i'm getting better, but still miss a few spots.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com