Official Luthiers Forum!
http://luthiersforum.com/forum/

New project SG
http://luthiersforum.com/forum/viewtopic.php?f=10123&t=46867
Page 1 of 2

Author:  dzsmith [ Sat Dec 19, 2015 4:44 pm ]
Post subject:  New project SG

Gonna whittle out an SG.
Walnut top, Maple body and neck, Asian Ebony board.
Gotta make some layout templates first.
Always exciting starting a new build.
Dan

Author:  fumblefinger [ Sat Dec 19, 2015 10:43 pm ]
Post subject:  Re: New project SG

And there's nothing like starting with the best wood! Jeez, that's some purty stuff!

Author:  dzsmith [ Sun Dec 20, 2015 11:20 am ]
Post subject:  Re: New project SG

Thanks Allan!
I figure if I make 4-5 guitars a year, and I spend 50 hours on each, I can justify buying high dollar lumber.
This batch cost me about $160.00. I can get two fret boards out of the Ebony.
Maple and Walnut billets from Goby Wanut, neck and fret boards from Gilmer.
Dan

Author:  Shaw [ Mon Dec 21, 2015 5:06 pm ]
Post subject:  Re: New project SG

Can't wait to see it. I love SG'S.

Sent from my HTC Desire 626s using Tapatalk

Author:  fumblefinger [ Mon Dec 21, 2015 11:34 pm ]
Post subject:  Re: New project SG

You just don't see flamed walnut very often. But the pattern on the maple is nice and tight too. And I love flame maple necks! Should be a stunner.

Author:  alan stassforth [ Mon Dec 21, 2015 11:40 pm ]
Post subject:  Re: New project SG

Can't wait to see how you put all those pretty woods together!

Author:  dzsmith [ Thu Dec 24, 2015 3:21 pm ]
Post subject:  Re: New project SG

Made the body template.
I'll need to make the control covers and pickup templates as well.
Sharpie pens don't work well under shellac.

My wife went nuts and bought us some proper Texas-sized steaks.
Happy holidays everyone!
Dan

Author:  Alex Kleon [ Thu Dec 24, 2015 5:53 pm ]
Post subject:  Re: New project SG

Looking forward to your build, as always, Dan! Nice looking beef. Hopefully nobody says "well done, please" or "pass the ketchup"!

Merry Christmas to you, and yours, Dan!

Alex

Author:  dzsmith [ Thu Dec 24, 2015 6:00 pm ]
Post subject:  Re: New project SG

Alex Kleon wrote:
Looking forward to your build, as always, Dan! Nice looking beef. Hopefully nobody says "well done, please" or "pass the ketchup"!

Merry Christmas to you, and yours, Dan!

Alex

Merry Christmas to you and your family!
Dan

Author:  dzsmith [ Sun Jan 03, 2016 11:21 am ]
Post subject:  Re: New project SG

Got the body and neck roughed out.
I plan to cut a tenon similar to a LP and use the body extension as the heel.
I think this should provide ample support.
I got this idea from seeing Kevin Looker's Flying V neck joint.
Dan

Author:  dzsmith [ Thu Jan 14, 2016 9:52 pm ]
Post subject:  Re: New project SG

Got the neck joint cut.
The rest will be easy.
Making fret markers out of a sheet of celluloid.
I ate the heck out of the steaks.
Bought my daughter-n-law a plane ticket to see her grandma in Chile.
That's about it.
Dan

Author:  fumblefinger [ Thu Jan 14, 2016 10:31 pm ]
Post subject:  Re: New project SG

dzsmith wrote:

Bought my daughter-n-law a plane ticket to see her grandma in Chile.
Dan

What a guy [clap]

Author:  Guitarizzmo [ Fri Jan 15, 2016 2:54 am ]
Post subject:  Re: New project SG

wow7-eyes That is some stunning Walnut, I wonder if the nuts from the tree it came from taste better? Michael Shaw has a squirrel as an avatar, maybe he knows? laughing6-hehe

Author:  Alex Kleon [ Fri Jan 15, 2016 8:20 am ]
Post subject:  Re: New project SG

fumblefinger wrote:
dzsmith wrote:

Bought my daughter-n-law a plane ticket to see her grandma in Chile.
Dan

What a guy [clap]


That's pretty cool, Dan! She must be a special girl! [:Y:]

Alex

Author:  Shaw [ Fri Jan 15, 2016 5:56 pm ]
Post subject:  Re: New project SG

Looking good. Can't wait.

Sent from my HTC Desire 626s using Tapatalk

Author:  Ken McKay [ Sun Jan 17, 2016 9:26 am ]
Post subject:  Re: New project SG

Nice. I think that's gonna work fine.


Sent from my iPhone using Tapatalk

Author:  dzsmith [ Sun Jan 17, 2016 11:37 am ]
Post subject:  Re: New project SG

Ken McKay wrote:
Nice. I think that's gonna work fine.


Sent from my iPhone using Tapatalk

Thanks Ken!
I must repeat that I love your finishing techniques!

Author:  dzsmith [ Wed Jan 27, 2016 10:08 pm ]
Post subject:  Re: New project SG

Just about ready to glue the fretboard to the neck.
The weekend weather will be 80F, so I plan to get this thing going.
I went with some snazzy binding to match the fret markers.
I spent 8 hours cutting out the markers and inlaying. Not an enjoyable task.
Dan

Author:  alan stassforth [ Thu Jan 28, 2016 9:06 pm ]
Post subject:  Re: New project SG

Hey, looks good, Dan!
I like the way you ran the figure in the walnut up,
instead of down.
I also really like that f.b. binding.
Bling city!
Reminds me of the old Nationals and the like!
Alan

Author:  dzsmith [ Thu Jan 28, 2016 9:47 pm ]
Post subject:  Re: New project SG

alan stassforth wrote:
Hey, looks good, Dan!
I like the way you ran the figure in the walnut up,
instead of down.
I also really like that f.b. binding.
Bling city!
Reminds me of the old Nationals and the like!
Alan

Thanks Alan!
I'm already planning another Tele build.
I've made six and have given them all away.
I still don't have one for myself.
Dan

Author:  dzsmith [ Tue Feb 16, 2016 7:09 pm ]
Post subject:  Re: New project SG

It's getting there.
Next steps will be cutting the body bevels, leveling the frets, then glue in the neck.
Dan

Author:  Chris Pile [ Wed Feb 17, 2016 12:37 am ]
Post subject:  Re: New project SG

Yeah, buddy.

Author:  alan stassforth [ Wed Feb 17, 2016 10:32 am ]
Post subject:  Re: New project SG

Great progress!
Looks mighty fine!

Author:  Shaw [ Thu Feb 18, 2016 5:55 pm ]
Post subject:  Re: New project SG

Looking good!

Sent from my HTC Desire 626s using Tapatalk

Author:  dzsmith [ Sat Feb 20, 2016 1:39 pm ]
Post subject:  Re: New project SG

The jig works pretty good!

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/