Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 8:07 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Sep 10, 2016 7:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Finished an SG style guitar today.
I installed a $25 vibrato that is working great and returns to tune well.
The arm sticks way up in the air. There are no installed spacers or washers.
I want to lower the arm.
I'm thinking of grinding off a spring coil. Finding a shorter coil seems unlikely
Anyone have better advice?
Thanks,
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Sun Sep 11, 2016 4:18 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Dan, I have a B7 that I'm going to install on a guitar I'm building - haven't done it yet and have no other experience with these things but I do have the instructions that came with it (sounds like you have an after market copy that may not have had instructions). Anyway it says "when you have the strings fairly taut but not up to pitch, insert the spring in the cups. Bring the strings up to pitch". It also shows in the diagram for the B5/500 "use fibre discs in bottom spring cup to adjust height of handle".

I also know that StewMac sells a device that is supposed to make restringing a Bigsby easier but that is the sum total of my knowledge about these things (for few more weeks at least).

ps - I had always heard that the original springs for these things were Harley valve springs - probably just an old wives tale.



These users thanked the author Freeman for the post: dzsmith (Sun Sep 11, 2016 6:35 pm)
Top
 Profile  
 
PostPosted: Sun Sep 11, 2016 6:37 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Mine does has some fibre disks.
I'll try removing them. I assumed they were to protect the metal finish.
Thanks Freeman,
Dan

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Sun Sep 11, 2016 8:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Report back, like I said, I'll be dealing with my first Bigsby in a couple of weeks and will probably have all sorts of questions.

btw - I like the SG


Top
 Profile  
 
PostPosted: Mon Sep 12, 2016 1:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2422
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
That is a gorgeous guitar! I want...

There are two ways that I know of to adjust the height of the bar. Adding/removing spacers/washers/pennies beneath or above the spring, and changing the spring. Bigsby makes 1" and 7/8" springs. The 7/8" spring is softer and gives a lower bar height. You can also find 3/4" springs.

Are the strings up to pitch in the photo? What gauge are they?

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Mon Sep 12, 2016 12:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
J De Rocher wrote:
That is a gorgeous guitar! I want...

There are two ways that I know of to adjust the height of the bar. Adding/removing spacers/washers/pennies beneath or above the spring, and changing the spring. Bigsby makes 1" and 7/8" springs. The 7/8" spring is softer and gives a lower bar height. You can also find 3/4" springs.

Are the strings up to pitch in the photo? What gauge are they?

Thanks!
Yes, up to pitch. Light guage, 9-42

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com