Official Luthiers Forum!
http://luthiersforum.com/forum/

The Hossenfeffer Bass Build
http://luthiersforum.com/forum/viewtopic.php?f=10123&t=49135
Page 1 of 1

Author:  Gilmourisgod [ Wed Mar 15, 2017 8:49 am ]
Post subject:  The Hossenfeffer Bass Build

This is a "clone" build of a Rickenbacker 4001/4003. Not sure how much interest there is on this forum, so I'll keep it simple. If anyone is interested in the excruciating details, check ou the full build threadon Talkbass at: https://www.talkbass.com/threads/the-ho ... d.1102535/

Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Chris Pile [ Wed Mar 15, 2017 8:58 am ]
Post subject:  Re: The Hossenfeffer Bass Build

Gonna be cool, I can tell.

Author:  Gilmourisgod [ Wed Mar 15, 2017 10:01 am ]
Post subject:  Re: The Hossenfeffer Bass Build

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Gilmourisgod [ Wed Mar 15, 2017 11:02 am ]
Post subject:  Re: The Hossenfeffer Bass Build

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Gilmourisgod [ Wed Mar 15, 2017 11:13 am ]
Post subject:  Re: The Hossenfeffer Bass Build

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Annnnd......That's where I am as of today, thanks for looking.

Author:  P Bill [ Wed Mar 22, 2017 6:18 pm ]
Post subject:  Re: The Hossenfeffer Bass Build

Lovely!!

Author:  fumblefinger [ Wed Mar 22, 2017 10:33 pm ]
Post subject:  Re: The Hossenfeffer Bass Build

The pictures make it look sooo easy!

Author:  Gilmourisgod [ Mon Mar 27, 2017 11:35 am ]
Post subject:  Re: The Hossenfeffer Bass Build

I assure you, this was not easy at any stage given this is my first full build from scratch. Check out the full build on TB if you want to see all the setbacks and mistakes!

Time the "Full Dress" hardware test. I had to relieve the output jack and neck pup routes, a pretty tight fit in both cases. I won't know for sure if anything is grounding out on the jacks until I wire it up.
Image
Image
Image\
Image

I decided to go with a pearloid TRC to match the pickguard, might as well embrace the bling!
Image

Ready for final sanding after nearly three years of weekend woodworking!
Image
Image
Image

Author:  Clinchriver [ Tue Mar 28, 2017 4:49 am ]
Post subject:  Re: The Hossenfeffer Bass Build

Nice one, I'm pondering an early precision build (tele headstock)

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/