Official Luthiers Forum!
http://luthiersforum.com/forum/

Tassy Blackwood Tele Build
http://luthiersforum.com/forum/viewtopic.php?f=10123&t=49381
Page 1 of 1

Author:  GourmetSaint [ Fri May 19, 2017 7:25 pm ]
Post subject:  Tassy Blackwood Tele Build

More about body finishing. Buying a fancy XGP maple neck from GF.

Going to French Polish using Ubeaut Hard Shellac.

First step finished. Sanded to 1200 grit
ImageImage

Sent from my SM-G920I using Tapatalk

Author:  GourmetSaint [ Fri May 19, 2017 7:59 pm ]
Post subject:  Re: Tassy Blackwood Tele Build

1st 50/50 sealing layer.
Image

Sent from my SM-G920I using Tapatalk

Author:  GourmetSaint [ Fri May 19, 2017 10:32 pm ]
Post subject:  Re: Tassy Blackwood Tele Build

Rubber made. Ready for first session of bodying.
Image

Sent from my SM-G920I using Tapatalk

Author:  GourmetSaint [ Fri May 19, 2017 10:55 pm ]
Post subject:  Re: Tassy Blackwood Tele Build

First layers...
Image

Sent from my SM-G920I using Tapatalk

Author:  GourmetSaint [ Sat May 20, 2017 4:37 pm ]
Post subject:  Re: Tassy Blackwood Tele Build

After 1st day. Ready to start 2nd day.ImageImage

Sent from my SM-G920I using Tapatalk

Author:  GourmetSaint [ Mon May 22, 2017 1:41 am ]
Post subject:  Re: Tassy Blackwood Tele Build

After day 2ImageImage

Sent from my SM-G920I using Tapatalk

Author:  GourmetSaint [ Sun Jun 18, 2017 12:07 am ]
Post subject:  Re: Tassy Blackwood Tele Build

Finally finished. I had a mishap with a bridge screw head shearing off flush with body and a bridging wire missing on the 4 way switch. Action and intonation set. ImageImageImageImageImageImage

Sent from my SM-G920I using Tapatalk

Author:  Chris Pile [ Sun Jun 18, 2017 7:39 am ]
Post subject:  Re: Tassy Blackwood Tele Build

Excellent finishing job! Tell me more about that gaudy peghead.

Author:  GourmetSaint [ Mon Jun 19, 2017 3:44 am ]
Post subject:  Re: Tassy Blackwood Tele Build

Chris Pile wrote:
Excellent finishing job! Tell me more about that gaudy peghead.

Aussie abalone shell

Sent from my SM-G920I using Tapatalk

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/