Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:53 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Jun 24, 2019 12:52 pm 
Offline
Walnut
Walnut

Joined: Fri Dec 28, 2018 2:03 pm
Posts: 35
First name: Michael
Last Name: Perkins
City: Charleston
State: SC
Country: United States
Focus: Build
Status: Semi-pro
Hey guys...

Fender made a short scale 30" bass with six strings, tuned e, a, d, g, b, e just like a reg. guitar, but down an octave, in the 1960-70's. I am building one with very similar specs, but I would like to change the fingerboard radius from the 9.5" that Fender used to 12". The main reason why I want to do this is because I have a 12" radius sanding block, but not a 9.5" one.

But also... it is my understanding that the lower the radius (i.e. the rounder the board) the more comfortable it is to play chords, but that single note solos tend to choke off notes that are bent, because as you push the string up and over the radius hump, the rest of the string gets closer to the neighboring frets until the note dies. But with a higher, flatter radius, it isn't as comfy to play chords towards the nut, but you can noodle for days as you solo.

Well... with a Bass, you aren't really ever bending notes too much or playing bar chords. So... what is the going logic on bass fretboard radii? I want this bass VI to be the best dang Bass VI ever made... so, I am willing to buy a new radius sanding block... but I want to make sure that whatever decision I make, I make it from an educated pov, and not just because I think it must be so.


Top
 Profile  
 
PostPosted: Mon Jun 24, 2019 2:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Use the 12"..... At this point it's almost industry standard.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Mon Jun 24, 2019 8:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I recently did a fretless conversion on a six string Ibanez bass and its f/b radius was 12 inches.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com