| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Flexing Redwood Top http://luthiersforum.com/forum/viewtopic.php?f=10128&t=26059 |
Page 1 of 1 |
| Author: | WudWerkr [ Sun Feb 14, 2010 5:31 pm ] |
| Post subject: | Flexing Redwood Top |
I have 7 sets of redwood tops . I am working with my first experimenting because I have never used redwood before . I want to flex it to a radius to make a arch in the top . Can redwood be arched like that without heating , wetting . or does it need heat to bend much at all . seeems kinda brittle to me 
|
|
| Author: | Haans [ Mon Feb 15, 2010 8:07 am ] |
| Post subject: | Re: Flexing Redwood Top |
How thick is it? How much are you going to bend and what kind of bend? If it's thin like a guitar top, it should bend OK. You could wet the outside and it would probably bend itself. |
|
| Author: | WudWerkr [ Mon Feb 15, 2010 8:18 am ] |
| Post subject: | Re: Flexing Redwood Top |
its about .110 thick and its being bent about 1/4" in 8" I "think it will flex that much. Is Redwood always this brittle ? my humidity is 40% most of the time |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|