Official Luthiers Forum!
http://luthiersforum.com/forum/

Hand Made Mandolin Jigs " Show Your Stuff "
http://luthiersforum.com/forum/viewtopic.php?f=10128&t=26145		 Page 1 of 1
Author:  WudWerkr [ Fri Feb 19, 2010 4:59 pm ]
Post subject:  Hand Made Mandolin Jigs " Show Your Stuff "
Seeing the Guages people have made got me to thinking that we need a thread for ALL HAND MADE JIGS . So Lets all see whats out there and share our ideas . I will be glad to start with my two Jigs for sawing and gluing .

This Is my Top & Back glue jig for book matching and gluing I have just finished . I slotted one side , permenantly mounted the opposite side and made T blocks and thumb screws for the adjustment . My Jig for sawing is set for a 3/4" angle .

Attachment:
100_0595.jpg
Attachment:
100_0596.jpg
Attachment:
100_0598.jpg
Attachment:
100_0601.jpg
Attachment:
100_0600.jpg
Author:  WudWerkr [ Fri Feb 19, 2010 5:13 pm ]
Post subject:  Re: Hand Made Mandolin Jigs " Show Your Stuff "
My Saw Jig for making book matched cuts .
Attachment:
100_0562.jpg
Attachment:
100_0563.jpg
Attachment:
100_0565.jpg
Attachment:
100_0569.jpg
Attachment:
100_0573.jpg
Attachment:
100_0574.jpg
Author:  Lillian F-W [ Sun Mar 28, 2010 9:19 am ]
Post subject:  Re: Hand Made Mandolin Jigs " Show Your Stuff "
I like it James. Did you cut the buttons or were you able to find something that worked with the eye screws?
Author:  WudWerkr [ Sun Mar 28, 2010 11:39 am ]
Post subject:  Re: Hand Made Mandolin Jigs " Show Your Stuff "
the eye screws are standard 5/16-18 screws amd the buttons are standard , they fit very tite . You do have to sand the backs of both buttons so that they fit in each side snuggly and then glue them.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/