Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 3:35 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon Mar 08, 2010 10:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Ok I am wanting to clarify somthing in my mind . Which , as you all know may take a while laughing6-hehe

Example : Lets say I have a Mandolin that has Top thickness of .115 and back thickness approx the same . Sides approx .110 .

I know there is a WORLD of other issues that come into play here , but for the sake of simplicity im wanting some basic directional advice .

IF I am thinking right duh The THICKER WOODS would respond better to med/ heavy strings , and the thinner you go the better it would respond to lighter weight strings .

Is this directional thinking correct ?

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Tue Mar 09, 2010 10:25 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Maybe. This is where experience comes into play. Forget the sides. They just don't contribute much of anything to the tonal qualities of the instrument.
There is a point at which a given guage of strings drives the top perfectly, the tension is just right and the load on the top is perfect. Lighter strings will not drive the top and heavier will overload it. As a general principle you might say that thicker tops need heavier strings, thinner lighter.


Top
 Profile  
 
PostPosted: Tue Mar 09, 2010 11:07 am 
Offline
Koa
Koa

Joined: Sat Jun 17, 2006 8:29 am
Posts: 960
Location: Northern Ireland
First name: Martin
Last Name: Edwards
Focus: Build
Status: Amateur
up to a point, yes you're right.

go too light and the strings won't drive anything, regardless of how light the top is. too heavy and the tension will collapse the instrument.

I made a octave mandolin with a 500mm scale.

regular mando gauge strings (11-40) just flopped and it sounded awful.

mandola strings (14 - 49) were SO much better and the instrument really came to life.

_________________
My soundclick xx luthier blog xx luthier soundclick


Top
 Profile  
 
PostPosted: Sun Mar 14, 2010 7:17 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
To extend this discussion one more step, what thickness should a spruce top be for mando-cello strings.

My original top was 0.085" and it lasted less than three months. The replacement top will have X bracing, maple bridge-plate and thicker spruce.

I am joining the plates at 0.125" and any opinions would be appreciated. ( 0.085" is heavyis for ukuleles)

Bob idunno


Top
 Profile  
 
PostPosted: Tue Mar 16, 2010 8:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Bob, I'd be thinking in the .170-.180" range if it's a mandocello. My 12 string guitars are in that range and tuned down to B or C. We're talking some poundage of pull here not ukes with nylon strings...


Top
 Profile  
 
PostPosted: Tue Mar 16, 2010 7:25 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
Haans:
Those thicknesses sound awfully heavy. Can you get some reasonable sound from something that thick?

Today I cut out the top in 0.125" sitka and decided to use X- bracing at 0.60X0.38". My bridge-plate will be 0.070 maple 2.5" wide. The bouzouki is 13.5" dia with maple back and sides.
If this one doesn't work I will have to do it your way.

Thank-you for the information. I should have asked for help sooner.

Bob :ugeek:


Top
 Profile  
 
PostPosted: Wed Mar 17, 2010 11:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
My twelve strings are really FAT sounding. Strings are .070-.015...try that on yer Martin! laughing6-hehe
Mandocello strings are pretty hefty, and that's why I mentioned my 12's. My mandolas are around .062 on the bottom end (carved top), and while I haven't made a cello (don't feel like carving a dugout canoe), I can only imagine the strings on it!
Good luck at .125 and hope it works for you. [:Y:]


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com