| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| New Spray Booth Virgin Voyage http://luthiersforum.com/forum/viewtopic.php?f=10128&t=26505 |
Page 1 of 1 |
| Author: | WudWerkr [ Fri Mar 12, 2010 8:08 pm ] |
| Post subject: | New Spray Booth Virgin Voyage |
I got a chance to use the new spray booth in the last two days . I have been working on a couple Mandos. The X Mando , And the Coffin as my daughter named it.  The Booth worked quite well , and well , My finishing ABILITY needs work However this is where I stand at this point . Now to let them set Hang and cure for a while . In the mean time ........... well lets start another one !!  ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") Attachment: 100_0606.jpg Attachment: 100_0607.jpg Attachment: 100_0608.jpg
|
|
| Author: | Robert Renick [ Fri Mar 12, 2010 9:43 pm ] |
| Post subject: | Re: New Spray Booth Virgin Voyage |
Looks cool, can we see the rest? Where is the air exchange, and all the cool lights? Just from the glance, if that is where you are spraying, you may have an issue with overspray bouncing off the wall and leaving little granules on the back. My primitive set up, I spray into a box fan and use an air filter from the heater behind it to absorb the overspray so it can't bounce. The overspray will usually sand and smooth easily. Enjoy, Rob |
|
| Author: | WudWerkr [ Fri Mar 12, 2010 10:12 pm ] |
| Post subject: | Re: New Spray Booth Virgin Voyage |
No No No , they are just hanging against the wall to cure a while. My booth is 4'0" wide and 8'-0" deep I have posted pics of it in earlier post in guitar building forum Will see if i can find the link http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25275&p=341970&hilit=+spray+booth#p341970 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|