Official Luthiers Forum!
http://luthiersforum.com/forum/

Bending
http://luthiersforum.com/forum/viewtopic.php?f=10128&t=26561
Page 1 of 1

Author:  SStallings [ Mon Mar 15, 2010 2:02 pm ]
Post subject:  Bending

How does everybody bend their sides? I am specifically curious about bending for a F5. I assume it is with a pipe but it appears to me that it might be possible to build a Fox type bender that would work. If anybody does it this way and has pics, I'd like to see them for ideas. Siminoff says he steam bends because there is no scorching of the maple sides. Any idea what his set-up looks like? Thanks.

Author:  Arnt Rian [ Mon Mar 15, 2010 5:33 pm ]
Post subject:  Re: Bending

It is certainly possible to use a pipe, but some builders use various bending jigs. I've never seen a Fox style one for F-style, but I've seen several like this variant by Andrew Mowry. http://mowrystrings.com/workshop1.htm. I believe LMI carries those heat blankets.

Image

Author:  Haans [ Tue Mar 16, 2010 8:51 am ]
Post subject:  Re: Bending

I've always used the 'lectric pipe, and well, call me contrary, an inside mould. That way you can bend it to fit perfectly and just clamp it up.

Image

Image

Image

Image

Image

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/