Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 4:09 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: top thicknes
PostPosted: Tue May 04, 2010 4:31 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 18, 2009 3:11 am
Posts: 140
State: Serbia
Status: Semi-pro
hi,

I start to build my first mando, so any advice for top thicknes I should start will be great.
Mando is flat top (maybe it will be domed, still don't decide) and teardrop style, scale 361mm.
Pic show my current progress

best
Fric


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: top thicknes
PostPosted: Tue May 04, 2010 7:51 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Thus far all mine have a 1/4" radius on the bracefrom front to back and 3/16" from side to side , the tops have been approx 1/8" to 3/16" thick and wetted and bent to the curve on the bracing.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: top thicknes
PostPosted: Sun May 09, 2010 5:46 pm 
Offline
Walnut
Walnut

Joined: Wed Aug 24, 2005 6:00 pm
Posts: 23
Location: Australia
3mm will be fine for a top thickness on a flat-top. It will be better to arch it a little with the bracing, and around a 2-3mm rise at the centre will work well

cheers

graham


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com