Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:40 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat Nov 20, 2010 1:10 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hello everybody ! :)

After my third electric guitar (viewtopic.php?t=21584), I'm starting a new project, a soprano ukulele, a Christmas gift for my wife (I'd better to hurry up).

Top and braces : Engelmann spruce
Back and sides : Ziricote
Fretboard and headplate : ebony
Black and white MOP inlays on the headstock
Neck : spanish cedar
Orange and blue maple purflings and flamed maple bindings
Tuners : grover
Rosette : Green abalone purfling + Orange and blue maple purflings

Image
Image

"Ours" means "Bear" in french... ;)

Here is a plan : http://www.lutherie-amateur.com/jojobil ... oulele.pdf

Some home made spool clamps :

Image

The top, back and the full set :

Image

Image

Image

First side bent (with an ibex iron) :

Image

The backstrip (flamed maple binding + orange and blue maple veneer) :
Image Image

And these afternoon's work, gluing the tail and neck blocks, I use friendly plastic for the inner mold :
Image
Image

Still a lot to do before Christmas... [uncle] :mrgreen:

Comments and tips are welcome of course... ;)

See you,

Ben


Top
 Profile  
 
PostPosted: Sat Nov 20, 2010 4:18 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Ben,
That is some striking ziricote... any more of that hiding around? Get that neck carved and I think you'll be in business for Christmas. Can't wait to see and hear the finished product.
chris

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 6:52 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hi Chris !

thanks for your kind words !!! :)

Chris Oliver wrote:
any more of that hiding around?


Huhu... I bought three planks (0.6" thick) to a veneer mill, I re-saw each board in two sets... Two OM and two dread or even jumbo size sets... ;)

Image

Image

Image

Image

Image

Image

Image

I love ziricote... bliss

Have a nice day,

Ben


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 8:25 am 
Offline
Koa
Koa
User avatar

Joined: Tue Aug 19, 2008 12:17 pm
Posts: 534
That's some great wood Ben! Shoes are nice also. :lol:

Going to be a mighty sweet uke!

Joe


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 9:57 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1270
Location: Calgary, Canada
Status: Amateur
Joe Sustaire wrote:
That's some great wood Ben! Shoes are nice also. :lol:

Going to be a mighty sweet uke!

Joe


laughing6-hehe


Top
 Profile  
 
PostPosted: Mon Nov 22, 2010 2:47 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
:mrgreen:


Top
 Profile  
 
PostPosted: Mon Dec 13, 2010 8:53 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hello there !

I had time last saturday to work on the ukulele... it's gonna be hot to finish it for Christmas... wow7-eyes :lol:


Gluing the kerfed linings :
Image

Kerfings glued, sides planed and sanded, I used a stanley 60 1/2 and a scraping plane :
Image

Image

Image

A home-made soundhole routing jig oops_sign :mrgreen: :
Image

Image

The rosette routed :
Image

Back's braces glued :
Image

Image

And a little bit of platina shellac :

Image
Image

I'll continue after work these week, and I hope I'll manage to finish it before Christmas...

See ya,

Ben


Top
 Profile  
 
PostPosted: Mon Dec 13, 2010 10:31 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Looking real good . [:Y:] Is the top 2 piece or single piece ?

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Mon Dec 13, 2010 2:08 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Thanks a lot James... :)

The top is in one piece, so I will have the second half to build one more... ;)


Top
 Profile  
 
PostPosted: Tue Dec 14, 2010 12:29 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Suuuuweeeeet... ho ho ho... !

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
PostPosted: Tue Dec 14, 2010 2:37 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Thanks Chris !!! :D ;)


Top
 Profile  
 
PostPosted: Wed Dec 15, 2010 4:29 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 554
First name: Brian
State: NY/Granada
Country: USA/Spain
Focus: Build
Quote:
I'll continue after work these week, and I hope I'll manage to finish it before Christmas...


It seems possible. Laurent Brondel built a concert uke to bring to woodstock in only 3 days.


Top
 Profile  
 
PostPosted: Sat Dec 18, 2010 12:32 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hi all,

Well, I had a tuff week at work, so I didn't spent time in my "shop"... [headinwall]

These afternoon, I worked on the rosette :

Blue and orange maple veneer and abalone :
Image

Image

Image

Image
Image
Image

For a first attempt, I'm quite satisfied, even if the abalone joints aren't very tight... but I didn't think I'll spent so much time on it... :| [uncle]

Have a nice evening,

Ben


Top
 Profile  
 
PostPosted: Sun Dec 19, 2010 2:31 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hello everybody !!!

After a good chisel sharpening these morning to weak me up, I deal with the back braces :

Image
Image

Then I made the soundhole :
Image

I glued the bridge plate (sipo mahogany) and the top braces, and carved them :
Image
Image

And I prepare the BRW bridge blank :

Image
Image
Image

I'm in holidays tomorrow night, so it's gonna be a 4 days lutherie marathon !!! :lol: ;)

Have a nice evening,

See ya,

Ben


Top
 Profile  
 
PostPosted: Mon Dec 20, 2010 8:10 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
good job Ben, keep it up. I have no doubt you'll finish with 4 days of holiday.
Keep us posted.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
PostPosted: Mon Dec 20, 2010 12:44 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Thanks for the support Chris !!! :) ;)


Top
 Profile  
 
PostPosted: Tue Dec 21, 2010 3:16 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hi all,

Today, I closed th box !!!

Image

Image

Image

Image

Image

Image

Image

Tomorrow, bindings channels, bindings' bending and gluing, thursday neck and fingerboard, friday inlays and one or two coats of shellac, the finishing is going to be for the 26th... oops_sign :mrgreen:

Have a nice evening,

Ben


Top
 Profile  
 
PostPosted: Wed Dec 22, 2010 12:05 pm 
Offline
Walnut
Walnut

Joined: Wed Jun 17, 2009 5:27 pm
Posts: 7
First name: Tom
Last Name: Walters
City: Kaministiquia
State: Ontario
Zip/Postal Code: P0T1X0
Country: Canada
Focus: Build
Status: Amateur
Well done and Merry Christmas.
Your wife is a lucky woman!
Tom
:D :D :D


Top
 Profile  
 
PostPosted: Sat Dec 25, 2010 11:10 am 
Offline
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 554
First name: Brian
State: NY/Granada
Country: USA/Spain
Focus: Build
were you able to give it to her?


Top
 Profile  
 
PostPosted: Tue Dec 28, 2010 7:44 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Mar 21, 2009 2:19 pm
Posts: 122
First name: Benjamin
Last Name: Castincaud
City: Niort
Zip/Postal Code: 79000
Country: FRANCE
Focus: Build
Status: Amateur
Hi there and Merry Christmas to all !!!

Well, I gave her the body... :?

I failed to bend the maple+veneer bindings, they were to thick (2.5mm)... I have to make new ones... ;)


Top
 Profile  
 
PostPosted: Tue Dec 28, 2010 9:16 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Its looking excellent [:Y:] , im sure you got some extra hugggs for that one ! laughing6-hehe

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Sun Jan 09, 2011 2:04 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 554
First name: Brian
State: NY/Granada
Country: USA/Spain
Focus: Build
can we see some updates?


Top
 Profile  
 
PostPosted: Tue Jan 11, 2011 9:03 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 25, 2010 2:05 pm
Posts: 42
First name: Charlie
Last Name: Lucking
City: Phoenix
State: AZ
Zip/Postal Code: 85020
Country: USA
Focus: Build
Status: Amateur
Yeah, man, this thing was looking GORGEOUS! Let's see the finished product! :D


Top
 Profile  
 
PostPosted: Fri Jan 14, 2011 4:01 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
Oui, on veut voir, et entendre!

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars


Top
 Profile  
 
PostPosted: Fri Jan 21, 2011 4:12 pm 
Offline
Walnut
Walnut

Joined: Wed Jan 19, 2011 5:21 pm
Posts: 2
First name: J
Last Name: Yanc
City: Corpus christi
State: Texas
Zip/Postal Code: 78418
Country: US
Focus: Build
Status: Amateur
Wow! That looks really great! Like to see a finished product. :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com