Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 4:09 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 81 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
 Post subject: Celtic Couple
PostPosted: Tue Nov 22, 2011 9:01 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I started a couple of Celtic style mandolins. These will have walnut back and sides, flat/braced backs, Sitka tops, Honduras mahogany necks and African blackwood fretboard and headstock veneer. My buddy Tim is in training during these and doing well. This starts a series of photos and video during the construction.

Enjoy!

You may have seen this in a previous post.... the pillowy Illinois Black Walnut.

Image

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Last edited by Chris Oliver on Fri Jan 06, 2012 4:24 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Tue Nov 22, 2011 11:36 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Here is Tim resawing the walnut for our backs.



That is a Delta 14" with 4" riser and Kreg fence. The blade is a 3/4" x Wood Slicer.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Wed Nov 23, 2011 10:10 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
In case you didn't watch the video, here is Tim resawing walnut lumber for our backs.

Attachment:
TimResawing.jpg


Here they are glued up. We use hot hide glue.

Attachment:
BacksGluedUp.jpg


Once dry, the backs are thickness sanded using the drum sander.

Attachment:
ThicknessSandingBacks.jpg


Here they are ready to be trimmed and braced.

Attachment:
BacksThicknessSanded.jpg


Happy Thanksgiving!


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Thu Nov 24, 2011 10:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Looking forward to seeing more on this . When is my walnut shipment comming in btw :D

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Thu Nov 24, 2011 11:02 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Thanks Chris and Jim. I really like the walnuts too... claro is beautiful stuff.

Jim, you haven't sent me your measurements yet...

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Wed Nov 30, 2011 11:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Looks great! I will be happily following this thread. BTW Jim is probably too shy, but since I have met him I can estimate his measurements for you. . .36-24-36. laughing6-hehe

Jim, that ought to get you a nice stock, feel free to share. . .

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Wed Nov 30, 2011 12:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Bryan Bear wrote:
Looks great! I will be happily following this thread. BTW Jim is probably too shy, but since I have met him I can estimate his measurements for you. . .36-24-36. laughing6-hehe

Jim, that ought to get you a nice stock, feel free to share. . .



You have it backwards I have large belly its 24...36..24 laughing6-hehe laughing6-hehe

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Wed Nov 30, 2011 12:56 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I'm not sure I have either size available. gaah

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Thu Dec 15, 2011 3:16 pm 
Offline
Koa
Koa

Joined: Thu Sep 10, 2009 4:01 pm
Posts: 1887
Location: UK
I prefer ABW to the European. I have a few sets that were planted in Kew Gardens (London) in the 19th century, probably brought over as an ornamental tree. Reminds me of good Chocolate. Lovely.


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Sat Dec 17, 2011 2:15 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Our last sunset tonight before returning to the shop. There is no black walnut over here.... but plenty of koa.

Attachment:
2011-12-16_18-20-51_983-1.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Sat Dec 17, 2011 2:56 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
... so how are mandolins "celtic" instruments? because they were popular in the 1960s folk movement, which afflicted all white people all over the earth?
by that rite, are fender stratocasters and gibson les pauls "traditional african instruments" as well? because they are prominent all over 1960s-70s afropop music.
as someone who is half irish, i cringe at the whole emasculated "celtic" lite-folk rubbish...my ancestors were never a culture of manicured, limp wristed Yannis! mandolins and dreadnaught guitars are "celtic" like '50s Chryslers are Pakistani


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Sat Dec 17, 2011 8:46 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Ahhh... post party wisdom.
It appears that you have asked and answered your own questions.
congrats on your heritage.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Tue Dec 20, 2011 11:15 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Finally, home and back in the shop. I've got the backs ready and bracing cut. One will get an X-brace, the other parallel bracing.

Attachment:
2011-12-20_21-54-02_176-1.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Thu Dec 22, 2011 12:59 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Hope this isn't too many photos.

Here are the two backs with cross-grain seam reinforcement being glued.
Attachment:
Backs-bracing-a.jpg


I marked, cut and chiseled out the slots for the bracing.
Attachment:
Backs-bracing-b.jpg


Next, sanded the 15' profile on the braces and glued them in place.
Attachment:
Backs-bracing-c.jpg


Now it is ready to have the braces shaped with a sharp chisel, a little sand paper and some attention and patience.
Attachment:
Backs-bracing-d.jpg


Here is the other back getting the x bracing fitted.
Attachment:
Backs-bracing-e.jpg


The x braces interlock. I prefer to glue down the first before moving on to the second as the glue needs to be worked with as quickly as possible.
Attachment:
Backs-bracing-f.jpg


I use hot hide glue for all the bracing. Before applying the glue, the parts get their temperature raised using a heat gun. The whole operation from start to finish took just over 4 hours including wait time and dinner.


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Fri Dec 23, 2011 6:45 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 28, 2010 4:48 pm
Posts: 59
First name: Bill
Last Name: Paulin
State: Qld
Country: Australia
Focus: Build
Chris, nice work I've been following you and your mate. I understand differnt bracing on tops why on the backs?

_________________
Regards from RangeView, Bill


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Tue Dec 27, 2011 12:25 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
P Bill wrote:
Chris, nice work I've been following you and your mate. I understand differnt bracing on tops why on the backs?


Thanks Bill,
Let's just say, the customer is always right, right? :)
I am following Graham's suggested x-bracing, on one and my own experience with back bracing on the other. All I can tell you now is that the x-bracing adds a little more labor in the notching and shaping process. I guess we'll see if one or the other holds its shape any better or worse down the road.

I don't know if you use any back bracing in those double basses you make. If so, have you had the opportunity to try different styles?
chris

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Last edited by Chris Oliver on Fri Jan 06, 2012 4:26 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Tue Dec 27, 2011 2:38 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 28, 2010 4:48 pm
Posts: 59
First name: Bill
Last Name: Paulin
State: Qld
Country: Australia
Focus: Build
Chris my bass has a carved back, no braces. Flat back basses have 3 braces shaped at the ends to give the back a slight curve. The flat backs sound just as good with less work and matreial invested.

_________________
Regards from RangeView, Bill


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Fri Jan 06, 2012 4:19 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
The back braces have been shaped and sanded.

Attachment:
backbraced-a.jpg


Attachment:
backbraced-b.jpg


One question Bill asked, above, was why the different bracing patterns on the backs. I am following Graham's plan on one back (the X braced) and my own experience on the other.

Here is some comparison data between the two.

x-braced
Black Walnut with Sitka Spruce bracing.
thickness: .09 - .11 "
weight: 4.14 oz
tap tone in the top, left, right, bottom and finally center:
http://www.infinityluthiers.com/audio/x-braced-back-12-01-06.mp3

parallel braced
Black Walnut with Sitka Spruce bracing.
thickness: .10 - .11"
weight: 4.61 oz (note: this back has considerably more walnut to trim than the x-braced back and should bring the weight down to less than 4 oz.)
tap tone in the top, left, right, bottom and finally center:
http://www.infinityluthiers.com/audio/p-braced-back-12-01-06.mp3

Here you can see the open grain left unbraced on the x-braced back. It is very flexible in this section.
Attachment:
backbraced-e.jpg


On the parallel braced back, this area is fully braced. As a result, the entire back is stiffer. If you listened to the tap of this back, you may have noticed that produces a tighter tone.
Attachment:
backbraced-d.jpg


Once the backs are glued to the rim the backs should both stiffen up even more. It will be interesting to go back and flex these areas at that time to see if there is a difference.

Attachment:
backbraced-c.jpg


My overall preference so far is the parallel braced back. It was less work by far, has a tighter tap and is more rigid over the whole back. Another comparison to consider is future repair. If a brace were ever to be knocked loose, the parallel bracing should be easier to repair. On the other hand, the x-braced back might be more shock resistant?

Next step, fabricating linings.


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Sat Jan 07, 2012 3:12 am 
Offline
Mahogany
Mahogany

Joined: Tue Dec 28, 2010 4:48 pm
Posts: 59
First name: Bill
Last Name: Paulin
State: Qld
Country: Australia
Focus: Build
I think like the parallel bracing more, assuming the same tap pressure, it has a bigger tone. It'll be interesting to compare the finished mandos.

_________________
Regards from RangeView, Bill


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Mon Jan 09, 2012 1:04 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I know... this is way too much info, but...

Linings

I start with a billet of basswood. Get a nice 90 degree angle on the jointer.
Attachment:
kerf-lining-a.jpg


Now slice off a few strips.
Attachment:
kerf-lining-b.jpg


Attachment:
kerf-lining-c.jpg


Set up the kerfing jig.... which is really just a straight piece of maple used as a stop. Set the depth of the kerf cut, clamp it down and get started. I put a line on the jig to help me align by eye. I back the basswood piece with the miter gauge. This also keeps it perpendicular to the table.

Attachment:
kerf-lining-d.jpg


Attachment:
kerf-lining-e.jpg


Once complete, remove the jig and rip out your individual strips.
Attachment:
kerf-lining-f.jpg


Now set your table at an angle and finish them off.
Attachment:
kerf-lining-g.jpg


There you have it.
Attachment:
kerf-lining-h.jpg


Just sand of some of the basswood fibers and they're ready to use.


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Mon Jan 09, 2012 1:11 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Attaching the lining.

I use clothespins that have been altered a bit. This allows them to clamp down on the lining without slipping. Also, I do wrap rubber bands around the jaws of the clothespin to create more clamping pressure.

Attachment:
kerf-lining-i.jpg


Attachment:
kerf-lining-l.jpg


Attachment:
kerf-lining-m.jpg


Attachment:
kerf-lining-j.jpg


Attachment:
kerf-lining-k.jpg


Next up we'll be sanding the linings flush to the backside of the rim.


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Mon Jan 09, 2012 4:30 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Sanding the linings

We'll be cutting the dovetail before the back is glued in place. Because of this, we are able to sand the linings flush with the backside of the rim and have a flat surface to allow easy cutting of our dovetail mortise.

I use a pencil and a flat sanding stick for this operation. The sanding stick is just a piece of plywood long enough to lay across the rim. I have 60 grit sandpaper adhered to the stick on one end.

Here are the two mandos ready for their linings to be sanded.

Attachment:
kerf-lining-n.jpg


Here is the sanding stick. Notice the pencil lines on the lining to show me where I have sanded.
Attachment:
kerf-lining-o.jpg


Here I have sanded the pencil marks off the lining and have reapplied a line to the bindings and, more importantly, to the rim itself.
Attachment:
kerf-lining-p.jpg


I have arrows here showing where to make your pencil marks on the rim. When sanding the linings, you want them to be flush with the rim without eating too much into the rim.
Attachment:
kerf-lining-q.jpg


All done. The top of the rims will get the same treatment before gluing on the carved tops. The back will be sanded to radius before it is glued on to the rim.
Attachment:
kerf-lining-r.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Last edited by Chris Oliver on Wed Jan 11, 2012 9:15 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Tue Jan 10, 2012 5:52 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 28, 2010 4:48 pm
Posts: 59
First name: Bill
Last Name: Paulin
State: Qld
Country: Australia
Focus: Build
I've never seen bulk kerfing before. Great!

_________________
Regards from RangeView, Bill


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Wed Jan 11, 2012 9:06 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
P Bill wrote:
I've never seen bulk kerfing before. Great!


No basswood down there? How do you make those beautiful basses? ;)

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Celtic Couple
PostPosted: Wed Jan 11, 2012 10:09 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Jointing, Sawing and Gluing Up the Tops

I had wanted to top one of these with cedar but I didn't have any thick enough (that I could find). I do, however, have a lot of old Sitka billets. Here is part of the same billet I used on my last A model. It has great strength and super tight grain... more rings per inch on the glue edge than I can count.
Attachment:
SitkaTops-Celtic-b.jpg


Here is one inch of the end grain. :shock:
Attachment:
SitkaTops-Celtic-c.jpg


Here I am jointing the glue edge. By flattening this edge, the glue edge, I'll be able to glue up immediately after resawing.
Attachment:
SitkaTops-Celtic-d.jpg

Attachment:
SitkaTops-Celtic-e.jpg

Attachment:
SitkaTops-Celtic-f.jpg


These tops will be great.
Attachment:
SitkaTops-Celtic-g.jpg


A little heat gun on the glue edge, some hot hide glue and a few clamps and we're off. Because the boards have extra thickness (to be removed later) I didn't have to worry too much about aligning the edges perfectly.
Attachment:
SitkaTops-Celtic-h.jpg


If you do any other woodworking, you owe it to yourself to get a couple of the Jet clamps and give them a try. They are the best I've used.
Attachment:
SitkaTops-Celtic-i.jpg


Next up is thicknessing and cutting out the tops.


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 81 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com