| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Looking for a flattop mandolin bridge. http://luthiersforum.com/forum/viewtopic.php?f=10128&t=36032 |
Page 1 of 1 |
| Author: | WvBluesman [ Thu Apr 05, 2012 9:12 pm ] |
| Post subject: | Looking for a flattop mandolin bridge. |
Can any of you tell me a source for a flattop mandolin bridge? I have found some just not the size I need. It is for a octave mandolin and measures 5/8 in tall, 5 inches wide w/ a 2" bone insert. I've been on eBay, stew Mac and a few other places but I am striking out. Any help would be great. Need to get this repair done and returned to my customer. |
|
| Author: | Chris Oliver [ Fri Apr 06, 2012 9:56 am ] |
| Post subject: | Re: Looking for a flattop mandolin bridge. |
Dan, This sounds like a custom job. A good source for a custom bridge like that is a luthier. Being minutes from Atlanta, you should have several to choose from. Also if a luthier is out of the question, order the tall one. Weber bridge  or make one... you only need a little patience, bow saw and some love. Murphy bridge |
|
| Author: | DavidFreeman [ Fri May 11, 2012 8:48 am ] |
| Post subject: | Re: Looking for a flattop mandolin bridge. |
yes looks liek a custom bridge saddle Buy a regular flattop bridge & put the saddle in yourself. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|