Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:40 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Thu Apr 09, 2015 2:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
So here's my first foray into the world of ukulele building! So far I've built 2 and a half guitars and a 3/4 size guitar, and I tried to pack in lots of features like carbon braces and adjustable necks, so now I'm looking forward to making something a lot smaller and simpler.
I'm building with wood that I've acquired over the years. The back and sides will be of cinnamon wood (!) that my granddad brought back from Brazil in the 60's. I've also laminated the neck out of some of it with a strip of beech in the centre. The soundboard will be sycamore that I harvested from a tree that got cut down in my church. I've decided to do a spanish heel for simplicity and lightness. I always draw my own body shapes, and this one is in between a concert and soprano in size, but I'm going for a 15'' concert scale length. Other than that I'm kind of making it up as I go along :)

Some pictures of the wood...
Sycamore top:
Image

Cinnamon back with some really nice figure!
Image

Neck blank:
Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sat Apr 11, 2015 12:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
I bet that smells good!

Looking forward to the build. Ukes really aren't any simpler than guitars... just smaller, so each individual task is quicker. And more socially acceptable to be lazy about non-essential features like binding/purfling/rosette :P


Last edited by DennisK on Sat Apr 11, 2015 6:02 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sat Apr 11, 2015 2:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
It certainly does - smells just like cinnamon!
Yeah I guess they have just as many parts, but compared to my previous guitars, it will be a lot simpler. Plus I'm doing the top, back and fingerboard flat so that makes everything easier.
I don't think I'm capable of being lazy when it comes to rosettes though :mrgreen: This will be my most complex one yet!

So I got the plates joined and took the thickness down a bit and have worked out a scheme for things. I'm going to do a cinnamon theme for obvious reasons. So, inspired by this image http://cdn.sheknows.com/articles/2011/12/pile-of-cinnamon-sticks.jpg , the rosette will be a pile of cinnamon sticks scattered around the soundhole! There'll be a couple of black rings in there as well to tie everything together a bit. I might put one of those star shaped cinnamon pods in there as well...

Image

I'm going to have to inlay each piece individually to get the layered effect, and I'm putting ebony powder mixed with CA glue in engraved lines to put in the detail.
The first piece:
The black smudges will get scraped off afterwards

Image

Something like the end effect hopefully!

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sat Apr 11, 2015 4:50 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
I've never seen cinnamon wood. Looks very pretty


Top
 Profile  
 
PostPosted: Sat Apr 11, 2015 6:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
I do love wood as an inlay material, for the layering ability. That would take many times longer in shell :) Great idea putting those two circular arcs layered in to give it some depth!

Is there more cinnamon wood where that came from? I'd love to get a stack of scraps to make dentellones, kerfed linings (only a few inches long, since I do them in short strips between side braces), side braces, maybe back braces and tail blocks...


Top
 Profile  
 
PostPosted: Sun Apr 12, 2015 3:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Image

I do have quite a lot of it, but I'm in the Uk so its probably not worth the postage for you.
I'm afraid I haven't got a clue where you could get any either. I'd never seen it before I found this piece in my grandfather's garage.
It's also called canella btw.

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sun Apr 12, 2015 1:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Rosette is progressing well :)

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sun Apr 12, 2015 1:37 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 18, 2008 8:43 am
Posts: 776
Location: Florida
First name: John
Last Name: Killin
Focus: Build
Status: Amateur
Peter,

I love what you are doing with that rosette.

John


Top
 Profile  
 
PostPosted: Thu Apr 16, 2015 4:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Thanks John :)
Well I've got halfway through the rosette and am debating whether to leave it as it is or carry on to make it like the drawing.
Hmmm...
In the meantime, I've decided the bindings and fingerboard will be EIR. I've also done a bit of preliminary shaping of the neck, but the bandsaw currently has a broken blade at work and I haven't got round to replacing it so theres not much progress with that.
I'm doing a double wedged spanish heel btw.

Image

Image

Image

Image

You can just about make out the headstock shape to be...
Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Thu Apr 30, 2015 1:32 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
I haven't made too much progress on this recently because of work and life getting in the way, but I've been doing bits and pieces here and there...
I nearly have a side bending machine! :) I'm just waiting for the blanket to get here from china. I've gone for a very simplistic type with just a form, waist caul and end clamps (not shown) clamped up with threaded bar. I've got 3 0.5mm aluminium slats for the sandwich too and a simple digital probe thermometer.

Image

All the parts are cut out, thicknessed and ready to go, the rosettes finished, so once I get the sides bent things should start moving more quickly 8-)

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Thu Apr 30, 2015 3:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Nice!

_________________
Pat


Top
 Profile  
 
PostPosted: Fri May 01, 2015 8:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Very nice , I look forward to seeing much more

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Mon May 04, 2015 10:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Thanks Pat and Jim :)
I'm doing a bit of neck carving while waiting for the heating blanket to arrive... This is the first time I've done a spanish heel - it's great not having to mess around with mortice and tenons and bolts! I'm counting on the low string tension of a uke making a neck reset less likely.
I've glued up a spalted maple headplate for it.

Image

Still needs a bit more work
Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Mon May 11, 2015 6:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Hooray! I've bent the first side on my new bending machine :) Worked perfectly. I'm very glad I didn't go with an automatic timer and thermostat - that would have been way overkill! Instead I have a nice slightly blingy, quilted maple and walnut manual temperature controller :D
I really didn't realise how hot this thing got! I managed to melt a couple of the plastic spring clamps holding the sandwich together. Thankfully no more accidents...
Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sat May 16, 2015 1:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
This seems to be coming together nicely now. I've got the other side bent and the tail block glued in, so as soon as I glue them to the neck, I'll have something looking like a ukulele :)
Before that, though, the neck needed a bit of work. I glued on the spalted maple headplate that was gluing up in the last post. I also decided to try binding the headstock for the first time. I've gone with the same binding as the rest of the instrument will have - turned out wonderful! (Although I cheated slightly and left the top unbound as I didn't fancy cutting the channel by hand)
I never understood why classical guitar builders carve the neck after it's glued to the body. It must make it so awkward. I'm kind of making up my own build method for this one - half traditional with a solera and spanish heel and half modern with a proper outside mould. I have tried to think through every step and I think it should work ok.

Image

Image

Image

I'm also working on an inlay for the back.

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Mon May 18, 2015 12:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Lookin' good.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Mon May 25, 2015 4:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Thanks Brian :)
I had a load of time to work this weekend and it's getting toward the nearly finished stage!
I got the linings all cut with a bodged up kerfing jig and got them glued in.

Image

Image

Then, before I could start bracing the plates, I had to finish the back inlay. I'd been putting this off because, since my last guitar, I've moved into a flat (no more workshop :( ) and in the process lost the part of my dremel that holds it onto its base. I also need to keep the noise down. So that meant I had to cut it all by hand.
It actually turned out better than I expected. In keeping with the cinnamon theme, I've done a simple stripe down the middle and a cinnamon pod at the bottom.
For some reason I did it backwards, so I inlaid the dark centres of the pods first, then cut the mahogany shape out and inlaid that, upside down, into the back and chiselled it down from above.

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Mon May 25, 2015 4:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
I was then ready to brace the plates. I kept to a fairly standard uke pattern, only I shortened the middle fan brace so it stops at the bridge patch. The body is smaller than a standard concert, so I thought it would be too stiff with 3 full braces.

Image

I also lost my go bar deck in the move, so I'm using the underside of my dining room table with weights stacked on top.

The finished bracing with the top glued on:

Image

My label is on - number 5! :)

Image

And we have a uke!

Image

Forgot to mention I put in a soundport to cover up a crack in the sides :D I'm going to do an inlay to cover the rest!

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Mon May 25, 2015 5:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I've been enjoying watching this one come together. I like the originality of the rosette.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Mon May 25, 2015 9:49 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 603
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
I love the rosette. Very cool!

_________________
Jason Moe
LaCrosse WI 54601


Top
 Profile  
 
PostPosted: Mon May 25, 2015 10:04 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1161
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
Must be my Catholic upbringing, but that rosette reminds me of a crown of thorns. A little upsetting to look at, actually. Otherwise a beautiful build!


Top
 Profile  
 
PostPosted: Tue May 26, 2015 4:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Thanks for the comments guys. I certainly didn't intend to upset anyone by it, but now that you mention it, I can certainly see what you mean.
I really should give credit (and blame :) ) to Michi Matsuda for the rosette as usual. It was more than a bit inspired by this far better one!

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sat May 30, 2015 4:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
I had some spare time after work this wek so I got the binding channels cut. Thats one thing I love about ukes - the flat top and back mean you can just use a standard router table with bearing guided cutter. No fancy binding jigs needed :) I still need to clean up the neck area by hand.

Image

I also worked on the fingerboard some more. I got the fret slots cut after much deliberating. For those that saw my other thread, I just used my normal pullsaw in the end. I hope the frets fit - I haven't tried them yet.
I think the fret marker inlays tie in with the rosette quite nicely.

Image

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Sat Jul 04, 2015 4:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Finally got around to working on this again! I've installed the frets and the binding. I did a palm tree silhouette inlay on the tail too just for fun :) I want it to have a sort of Brazilian feel (because that's where my Grandparents lived and where they brought the wood back from that it's made of) but I guess to most people it'll just look Hawaiian!
I still need to clean up the tape residue and make a heel cap of some sort and glue on the fingerboard. Then it's ready for spraying.
The binding is EI rosewood with maple and macassar ebony purfling (just because it was left over from a job at work :D ).

Image

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
PostPosted: Tue Jul 14, 2015 12:32 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Finishing time!
I've drilled the holes for the tuners, put in the heel cap and done the first coat of zpoxy pore filler.

Image

Image

Image

Image

Image

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com